Simon Says Stamp Artsy Butterflies Text

Hello Friends, and welcome back! I’m so glad you stopped by today to check out this project featuring the Artsy Butterflies. Let’s get right into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

If you’re like me, you’re hoarding patterned paper like it’s never going to be made again, am I right?! I decided that I would part with a little bit of it, and stamp the Artsy Butterflies onto a panel of pastel marble paper from P13 using VersaFine Onyx Black ink and heat set it with clear embossing powder. I then used the coordinating dies to trim them out, along with a black layer as well. I will link to a similar patterned paper at the bottom of this post.

The background is a combination of things with the bottom layer being a panel of ColorBlend cardstock that was black splattered and then a panel of Dina Wakely transparency that I smeared with Distress Paint.

The sentiment was stamped using VersaMark ink, heat set using detail white embossing powder and trimmed out with three additional cuts for a stacked sentiment. I adhered the black butterfly to the stamped butterfly using foam squares, and then those were adhered to the transparency using strong double sided tape. To adhere the transparency to the colored panel, I put some strips of the same tape on the backside underneath the butterflies so that you wouldn’t be able to see it. The sentiment was secured with the same tape as well.

That does it for this project. I hope you enjoyed it, and I hope you have a great day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Trailside Birthday Raccoon

Hello Friends, and thanks for joining me! My friend, Allison Frazier, has a brand new collection with Spellbinders, and I was super excited to get to play with this Trailside Trio set! There are lots of products and add-ons for this set, but for today, I’m just playing with the trio. Let’s go through the details.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I love this set because my friend designed it, but I also love this set because I live on several acres of land, and we see these same animals on our property every day! I chose to play with the raccoon, because there is a raccoon that comes to visit me almost daily! She came the first time as a baby with her Mom back in 2021, and just last year, she brought her very own baby to visit me as well. She does allow me to pet her and hang out with her on the deck. So there you have it, a little glimpse into my life! I’ll add a pic of her at the bottom of this post, if you’re interested in seeing my raccoon friend!

I first die cut all of the pieces of the raccoon from different gray colors, white and black cardstock. On the white portions, I did some light ink blending using Flannel ink before assembling the raccoon with liquid glue. The design of this card came about because I actually had all of these flowers already assembled, so I thought a flower field could be super cute.

I used an older DOML set to cut the hills from green cardstock, and did some ink blending on the tops of those using Pearfection ink. Before adhering those to the card base, I did some blue ink blending to create a sky using Cadette ink. The flowers were adhered using glue, while the raccoon was adhered using foam tape. The sentiment was gold foiled onto black cardstock and adhered with liquid glue as well. To finish up, I added a few gold metallic pearls to some of the flower centers to tie in the gold sentiment.

That does it for this project! I hope you like it, and I hope you’ll swing over and check out Allison’s collection on the Spellbinders website. Thanks again for joining me, and I hope you have a wonderful day!

This is my friend, Gimpy. She got this name because when she was much younger, she had a hurt foot for quite a while, and the name Gimpy just stuck. It’s silly, I know! She’s a very sweet girl, and I enjoy her visits!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Grateful Heart

Hello Friends, and welcome back! Today’s post is featuring the new Crocus Duo from Simon’s latest release. This ended up being a twofer project, but I’m only writing about one of them today, so let’s go ahead and go through the details.

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I knew that I wanted my Crocus flowers to be purple, so I die cut the flowers several times from three different colors of purple cardstock. Once I had cut all of the flowers, I did some ink blending on them using Crocus and Lilac inks, and assembled them. The flowers are only two layers, but I cut an additional layer to be adhered to the back. While I was cutting, I did cut the stems and grass from green cardstock.

My background was created using a very old Simon background stamped onto a very pale blue cardstock using VersaMark Ink and heat embossing it with white powder. This is where the twofer part comes in to play. I die cut that blue panel using the Whirl Diamond Plate, but only used the inner circles for this project. I also die cut a panel of Moonflower cardstock using that same plate. Before assembling this part, I decided that I wanted those inner circles black splattered.

This background ended up being a little bit of work, but I think it was worth it in the end. I went ahead and glued the Moonflower panel to the card base, and inlaid the splattered blue circles. After playing with the flower arrangement, I decided that it might be pretty to add some grass pieces that were similar to the other cardstock colors that I was using.

The flowers were adhered using foam tape, while the stems and various leaves were secured with liquid glue. The sentiment was stamped, white heat embossed, trimmed out and adhered to the panel with glue as well. To finish up, I added some dew drops for added interest.

That does it for this project. I hope you like it! I’ll post the other project using the rest of the background at some later date. Thanks again for stopping by, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Braided Greetings

Hello Crafty Friends, and thanks for joining me! Today’s projects are featuring the new Braided Embossing Folder from Simon’s latest release, In My Heart. These were super simple, so let’s quickly run through the deets!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began by running the embossing folder through the machine using Neenah cardstock to create two panels. I then did some ink blending on the panels using Carnation, Cadette, Surf, Limelicious, Sherbet and Orchid. Or at least that’s what I think that I used! I’m always really good about writing everything down, so I’m not quite sure what happened with these projects!

The sentiments were stamped using VersaMark ink, heat embossed using Detail White Embossing Powder and trimmed out four times for a stacked sentiment. I was unable to find one of the sets on the Simon website, so I assume that it was discontinued. I’m sorry about that, and I’m sad, because that was a really great set! The panels were trimmed down, adhered to a black panel and then the card base. Since the sentiments were stacked, I just went ahead and secured those using liquid glue to finish up.

Two quick cards for the win! These types of embossing folders are great for super quick cards, in my opinion. They look great ink blended with a simple sentiment. Thanks again for stopping by, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together By Design Color Cube Floral

Together by Design is a monthly collaboration where a small group of designers all create with products from the same featured brand. Each of us chooses a favorite product and puts our own creative spin on it, showing just how many different ways one brand can inspire. Follow along, explore every project, and discover new designers and new favorites along the way.

This month’s featured brand:  The Color Cubes – #193

Here is a list of designers participating this month:

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began my project by gold foiling the Pinkfresh Plumeria Press Plate twice. I did it twice, because I wasn’t sure if I was going to use one or two on my card. Once the foiling was complete, I pulled the inks that I thought best matched the featured card number. I began my ink blending using the coordinating stencils and then trimmed them out using the coordinating dies.

The backgrounds was created by gold splattering the Ornate Banner and the Stitched Basket Weave.. As I always say, I needed more leaves, so I cut the Curvy Leaves from Peridot and Gold cardstock. Unfortunately, I was unable to locate the banner and leaves to link to, but just use items in your stash!

The banner and panel were adhered to the card bases, the leaves were secured in place using liquid glue and the floral panel was adhered with foam tape. The sentiments were gold foiled as well, added with foam tape, and some gold metallic pearls were added to tie it all together and finish up.

That does it for this month’s project! I hope you enjoyed it, and I hope you’ll go check out the other designer’s projects using this same card number from the Color Cubes. Thanks for stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Cute Duckling

Hello Friends, and welcome back! Today’s post is featuring the new Cute Duckling from Simon’s latest release, In My Heart. Let’s go ahead and run through the details for this one.

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the pieces for the duckling from colored cardstock and adding some ink blending using Honey ink. I assembled the pieces and set that aside while I worked on the rest of the card.

The background was created using the A2 Postage Rectangles with some black splatter for added interest. The sentiment was stamped using VersaMark ink, heat set using white embossing powder and trimmed out several times for a stacked look. The panel was adhered to the card base, the sentiment was glued in place and the duckling was added with foam tape for added dimension.

That’s it for this one! A super quick, clean and simple card! Don’t forget to swing by and check out the entire In My Heart release over on Simon’s website. Thanks again for stopping by, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Watercolor Wild Rose

Hello! Hello! Thanks so much for swinging by to check out today’s project featuring the new Wild Rose stamp set from Simon’s latest In My Heart release! Let’s get into it!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by stamping both of the florals onto a large panel using VersaFine Onyx Black ink and heat setting them with clear embossing powder. I then did a very loos watercolor wash over both and went back in with darker details and shadowing. Once everything was dry, I fussy cut both images, as I did not have the coordinating dies.

The background panels were created with black splatter and the Nested Stitched Rectangles. Both sentiments were stamped with VersaMark Ink, heat set using Detail White Embossing Powder and cut multiple times with the coordinating dies.

The florals were adhered using foam tape, while the sentiments were secured with liquid glue. I thought some clear drops were a nice finishing touch.

That does it for this one! I’m not very good at watercolor, but I enjoy it when I do give it a try. Don’t forget to check out the entire In My Heart release, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Striped Missing You

Hey There! Thanks so much for swinging by! Today’s project is featuring the new Missing You die from Simon’s latest release, In My Heart. It’s a super quick one, so let’s go ahead and go through the deets!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I already had a striped little panel in my stash that I had been saving for a card just like this! It was made using scrap cardstock and double sided tape. I went ahead and cut the Missing You from that little panel, cut it three times from black and adhered all of them together, offsetting the black ever so slightly.

My background panel was created using the A2 Nested Stitched Rectangles, a stamp from the Tim Holtz Brushstrokes set and Seafoam ink. The sentiment was adhered to the panel using liquid glue, and my card base was splattered with some Surf ink before the panel was adhered.

See, a super simple project for today! This was my first time using this Brushstrokes set, and I really kind of like it! It adds just the right amount of something behind a sentiment. Don’t forget to swing over to Simon’s website and check out the entire In My Heart release. Thanks again for swinging by, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Best Mom

Hello Crafty Friends, and thanks for stopping by! I’m back today with a project featuring the new Best Mom Background stamp from Simon’s latest release, In My Heart. Let’s go ahead and get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by stamping the background onto a panel using PFS Misty Coast ink. My next step was to create a frame using the older Stitched Rectangles set. The flowers were cut from Neenah using the Hanging Leaf Ring set and the leaves from that set were cut using Smoke cardstock, while the Budding Branches were cut from Fog cardstock.

The flowers were ink blended using Bubblegum and Carnation inks. I applied different pressures to achieve different levels of ink intensity. The sentiment was stamped using VersaFine Onyx Black ink and double heat embossed for a smoother finish. Unfortunately, I was unable to locate this particular stamp set on the Simon website, but they have other great sets for Mother’s Day. I’ll link to one that is very similar for your convenience. That was cut several times using the coordinating die for a stacked look, which I love.

Before the assembly process, I adhered a clear drop to the center of each flower for added interest. The background panel was trimmed down, the frame was adhered using foam tape, the leaves were added and then the flowers. The sentiment was secured with foam tape, with a few more flowers added around that and clear drops were added to the branches to finish up.

That does it for this project! I hope you enjoyed it! It was a labor of love, because I kept thinking of how much I would have loved to give this card to my Mom while I was making it. Anyhoo, I appreciate you stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Latte Birthday Wishes

Hello Friends and thanks for stopping by! The In My Heart release from Simon is live, and I’m back today with a project featuring the new Thanks a Latte stamp and Scalloped Arches Frames. Let’s run through the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

When I saw the arches, I immediately thought of a shaker card, so that’s what I set out to create! I thought some cute coffee shaker bits would be fun, but I didn’t have any of those! So, Etsy to the rescue! I stamped the critter from the Thanks a Latte set with VersaFine Onyx Black ink, heat embossed it with clear powder, colored it with Copic markers and fussy cut the image. As a note, there are coordinating dies for this set. I also went ahead and stamped the sentiment onto black cardstock using VersaMark ink, heat set that with white powder and trimmed it down into a strip.

The arches were cut 6-7 times I believe. I cut a piece of acetate and secured it in place and glued another arch on top of it so that it would stay in place. I cut a larger arch and glued that to the card base, sprinkled the coffee shaker bits into the center and glued the stacked acetate arch atop that. There might have been an easier way to do this, but I couldn’t think of it, because the die also cuts out the center portion of the arch. If you can tell me a better way, please let me know!! Once everything was secured, I added the critter and the sentiment atop the acetate with strong double sided tape to finish up.

That does it for this project! I hope you like it, and I hope if you have a better way for assembly, that you’ll send me a message! Don’t forget to check out the entire In My Heart release! Thanks again for joining me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts