Tag: cards

Simon Says Stamp STAMPtember Collaboration with Concord & 9th

Hello Friends and welcome back! Today’s STAMPtember collaboration set is with Concord & 9th and features a wreath building stamp set. Let’s not waste time and get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this card by stamping the florals and leaves onto a panel of Neenah 110lb cardstock using C&9 inks in Grapefruit and Artichoke. This set also includes individual flowers, so I stamped those using Nectar ink and fussy cut those out.

I trimmed the panel down using SSS Postage Stamp Edge Frames and gave it a gold splatter for additional interest. I always need more leaves so I used the C&9 Primrose Garden dies for those, and cut several leaves from two colors of green cardstock.

The sentiment that I used is the C&9th Scripted Thanks die, which is from a summer camp bundle several years ago and doesn’t appear to be available. But, you can use whatever you have in your stash that will fit. I cut the thanks once from gold cardstock and twice from black cardstock and adhered those together using liquid glue.

My panel was adhered to the card base and I glued the green leaves in place and adhered the individual flowers atop those with foam tape. To finish up, I added some PinkFresh Jewels for some sparkle.

That does it for this project! I hope you enjoyed it, and I hope it inspires you to get crafty in your space! Don’t forget to head over to Simon’s website to snatch up your copy of this collab set, because once they’re gone, they’re gone forever! Thanks again for stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Simple Thanks Floral Spray

Hello Friends, and thanks so much for stopping by! The STAMPtember release is in full swing, and I’m back today with a project featuring several new products. I kind of went crazy with the new products on this one because it’s featuring the new Rustic Layering Flower, the Double Plaid Cover, the Simple Thanks and the Crimped Floral Embossing Folder & Die. So, let’s go through the details for this one!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I said that I used the Crimped Floral Embossing Folder & Die, but I did not use the entirety of the folder itself. I used it to create the smaller flowers in my spray. Another thing to note, this card is giving an illusion of the Double Plaid Cover. I saved the left over squares and triangles from a previous project and ink blended the edges of those using Earl ink for a shadowed effect.

To begin, I used the Double Plaid Cover to emboss a panel of Neenah 110lb cardstock and then adhered the grey ink blended pieces using foam squares. I thought this was a super interesting way to utilize those leftover pieces. For some color inspiration, I pulled a card from the Color Cubes, and die cut the smaller flowers from colored cardstock, using the included die from the Crimped Floral Folder. For some depth, I did some ink blending on those using C&9 Peacock and Sorbet inks, and added a black crystal to the centers of the flowers.

I then cut the larger flower using the Rustic Layering Flower and ink blended that using that same Peacock ink before assembling the pieces. As always, I need leaves to go with my flowers, so I used the Arching Leaf Border set and cut those from a sage and pine colored cardstock. While die cutting, I went ahead and die cut the Simple Thanks four times from black cardstock, and adhered all of those together with liquid glue.

I began gluing the leaves in place first, as those were the bottom layers, and then I glued the larger flower in place next, and tucked in the other flowers where needed for fullness. The sentiment was glued directly to the panel to finish up.

That does it for this one! I hope you enjoyed it as much as I did! Don’t forget to head on over to Simon’s website to check out the entire STAMPtember release, and stay tuned all month long for the long awaited collaboration sets! Thanks again for hanging with me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Argyle Paperwhites

Hello Crafty Friends and welcome back! The Spellbinders September releases are live, and I’m back today with a project featuring the new Paperwhites Glass Vase and Dies from Susan Tierney-Cockburn’s Winter’s Grace Garden Collection. Let’s go ahead and jump into the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

This was my first time working with Susan’s flowers, and I just have to say, they are absolutely wonderful to work with! I love that she provides a video on the product page and offers guidance on how to shape, color and assemble the elements. This set does include a vase and a bulb, but I opted to use only the flower dies for my card today. I die cut eight flowers from Neenah 110lb cardstock and used the Sizzix Shaping Kit to soften and curl the petals. For the stamen, I used Copic Marker Y38 to color those a golden yellow before assembling.

I assembled all of my flowers and began working on the rest of the card. I used the Argyle Plaid 3D Embossing Folder for the background, and I used Sealed Blooming Stems for the leaves, which were cut from Sage cardstock. The sentiment is from the You Are Everything Sentiments BetterPress set, and that was gold foiled.

The background panel was adhered to the card base, and I began securing the leaves with liquid glue, while adhering the flowers with a foam square. The sentiment was adhered with foam strips, not that this card needed any more dimension! To finish up, I added some clear drops for a little bit of shine.

Like I said earlier, this is the first time that I’ve used Susan’s flowers, and I’m blown away by the dimension! This is definitely a hand deliver type of card!

That does it for this project. I hope you enjoyed it as much as I did! Head on over to the Spellbinders site to check out all of the new items in the September release. Lots of fun things! Thanks again for joining me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Rainy Birthday Wishes

Hello Crafty Friends, and welcome back to my blog! I appreciate you joining me for today’s project featuring the new Spellbinders Autumn Rain BetterPress Plate. How fun is this plate?!?!? I mean for real! Let’s not waste any time and get into the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

For this project, I wanted a dreary grey background with brighter umbrellas, so I inked the Autumn Rain plate with VersaFine Clair Morning Mist ink. If you’re looking for a great grey ink, then you should definitely check this one out! I did ink the plate a couple times and run it through the machine for better coverage.

Once the background was complete, I used the Autumn Rain stencils to add color to the leaves and umbrellas. The ink that i used was SSS Pawsitively Saturated Inks in Bubblegum, Carnation, Sweets, Celery and Melon. I also used a Zig Wink of Stella pen to add a touch of shimmer to the raindrops, although it’s hard to see that in the pictures.

The panel was then trimmed down using the Nested Postage Labels & Tag set and then adhered to the card base. I gold foiled the sentiment, which is from the You Are Everything Sentiments BetterPress Plate set, onto black cardstock and trimmed it with the coordinating die. I did cut it three times for a stacked look and adhered the sentiment to the panel using foam strips to finish up.

That does it for this project! I hope you enjoyed it as much as I did! Head on over to the Spellbinders website to check out all of the new September releases. There’s so much awesome stuff in this release! Thanks again for joining me, and have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Withered Viburnum

Hello Friends, and welcome back! I’m back today with a card featuring the new Withered Viburnum from the Winter’s Grace Garden collection from Spellbinders. This is such a beautiful set from Susan Tierney-Cockburn, and I just loved adding sparklies for the berries! Let’s go ahead and go through the details.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by cutting the leaves from Fern cardstock, and cutting the berry portion from Indigo cardstock. I did end up cutting the leaves several times for a fuller spray. Once the cutting was complete, I did some ink blending on the leaves using SSS Pawsitively Saturated Inks in Cabernet and Kale.

Like I said earlier, I added jewels to the berry portions and then went to work on the rest of the card. The background was created using the Leafy 3D Embossing Folder and I lightly ink blended some Sprout ink on that before splattering it with some gold acrylic ink.

The sentiment, which is from the Making Me Smile Sentiments set, was gold foiled onto black cardstock and die cut several times using the included die. I adhered the background panel to the card base and then began the layout.

The leaves were adhered first and the berry clusters were adhered next, tucking those in as needed. To finish up, the sentiment was adhered with foam strips for dimension.

That does it for this one! I hope you enjoyed it, and I hope it inspires you to get crafty in your space! Don’t forget to head over to the Spellbinders website to catch all of the September releases! Thanks again for stopping by, and have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Picture Perfect Sunflowers Large Die of the Month

Hello Crafty Friends, and welcome back! Thanks so much for stopping by! The September Large Die of the Month from Spellbinders is titled Picture Perfect Autumn, and for today’s project, I only used the sunflowers from the set. You can check out my last post to see the scene that I created with more elements from this set.

If you are not familiar with the Spellbinders Clubs, here’s a little bit about how it works ..

  • On the 6th of the month, Non-Club members can join the club and get this month’s Club product(s) at the reduced Club Member price with free shipping.
  • On the 27th of the month, registration for this month’s club products closes.
  • On the 10th of the next month, Club products become available to everyone without requiring a Club membership; however, they are available at regular price and there is no free shipping. If a product is sold out, it will be re-ordered.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

Even though I’m only featuring the sunflower today, I think it’s great to look at sets and think of different ways that you can use them. To begin these cards, I die cut the sunflowers from yellow cardstock and cut the centers from a dune colored cardstock.

When I was done cutting, I did some ink blending on the pieces using SSS Pawsitively Saturated Ink in Citrine, Clay and Woodsy. Those pieces were then adhered together using liquid glue. For the leaves on these cards, I opted to use the Sealed Leaf Sprigs and cut a bunch of those from two colors of green cardstock.

My background was created using the Leafy 3D Embossing Folder, along with some splatter and those were adhered to the card bases before assembly. The sentiments that I used were already made, because I like having a stash of sentiments on hand to choose from. These were created from the You are Everything Sentiments BetterPress Plate and the Faith Glimmer Sentiments, along with gold and matte gold foil. When trying to link the faith sentiments, I was unable to find those, so I think those must have been discontinued, unfortunately. Whenever I create sentiments, I do cut them three times and stack them for more sturdiness.

To assemble the card, I arranged and glued the leaves in place, adhered the flowers using foam tape, and glued the sentiments atop the leaf stems.

That does it for this set of cards! I hope you enjoyed it, and I hope it inspires you to look at your die sets a little bit differently! Don’t forget to head over to the Spellbinders website to check out all of the Clubs that they have to offer! They really are a great value! Thanks again for stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Double Plaid Floral

Hello Crafty Friends, and welcome back to my blog! I’m so glad that you stopped by to check out today’s project featuring the new Double Plaid Cover, as well as the new Rustic Layering Flower. These new products are from the STAMPtember release, and I had a blast making this card, so let’s get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by pulling an inspiration card from the Color Cubes, just to get some color variety going on. Once I decided on a color combo that I liked, I die cut the Rustic Layering Flower three times from aqua, orange and pink cardstock. This flower has several pieces so I did some ink blending on those pieces before assembling them. The ink colors that I used were Carnation, Sweets, Ocean, Cantaloupe and Sherbet.

For some additional flowers and leaves, I used the Fine Floral Stem for some light blue flowers, as well as the Budding Branches for some white leaves. I have to say that the Budding Branches is by far my most used leaf set from Simon! I did die cut the centers of the flowers from gold cardstock to pull the elements together.

Moving on to assembly .. I splattered my card base using black acrylic ink before adhering the Double Plaid Cover with foam strips. I arranged the flowers and leaves and adhered those using a combination of liquid glue and foam strips to provide support where necessary. I always have to add embellishments to the “buds” of the leaves, because I just think it’s so awesome and so pretty!

I stamped the sentiment, which is from the Mix & Match Butterflies set, using VersaFine Onyx Black ink and heat set that using Ranger Clear Embossing Powder. I used the coordinating die to cut it several times for a stacked look. The sentiment was glued directly to the panel to finish up.

That does it for this project! I’m sorry if you’re sick of florals, but I literally can’t help myself! Florals and leaves are my jam! Don’t forget to check out the entire STAMPtember release, as well as all of the collaboration sets happening all month long! Thanks again for joining me, and have yourself a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Picture Perfect Pumpkin Patch Large Die of the Month

Hello Crafty Friends, and welcome back! It’s the 6th of the month and that means the new Spellbinders Clubs are released to NON Club Members! The Clubs are a super, great value, and I hope my card today inspires you to check them out, if you’re not already a club member.

Here’s a little bit about how the Clubs work ..

  • On the 6th of the month, Non-Club members can join the club and get this month’s Club product(s) at the reduced Club Member price with free shipping.
  • On the 27th of the month, registration for this month’s club products closes.
  • On the 10th of the next month,  Club products become available to everyone without requiring a Club membership; however, they are available at regular price and there is no free shipping. If a product is sold out, it will be re-ordered.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

For this month’s Large Die of the Month Club, which is titled Picture Perfect Autumn, I created a fun pumpkin patch scene. So, let’s run through the details for this one! I knew going in to this project, that I wanted a rolling hills type of scene with some sunflowers and a pumpkin patch, so I started the die cutting process. I used blue, brown, green, kraft, orange, yellow and white cardstock colors for all of the die cutting of the various pieces for the scene.

Once all of the cutting was done, I did some ink blending on the pieces using SSS Pawsitively Saturated Inks in Honey, Clay, Pearfection, Field, Morning and Mocha. I then assembled the flowers and the pumpkins using liquid glue. For the assembly of the card, I worked my way from the top to the bottom of the card, securing pieces with glue and tucking items between the layers as necessary. The sentiment was added to the top of the card with foam strips for a little bit of dimension.

That does it for this project! Are you a die cutting fan or not? I’d love to know in the comments! Personally, I absolutely love die cutting! Whoever came up with the idea of die cutting is the cat’s meow in my opinion. Thanks so much for stopping by, and don’t forget to check out all of the Clubs over on the Spellbinders website. I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Crimped Floral Thanks

Hello Crafty Friends, and welcome back to my blog! Today’s project is featuring two new products from Simon’s STAMPtember release, the Crimped Floral Embossing Folder and the Simple Thanks. Let’s not waste any more time, and get right into the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by embossing a panel of Neenah 110lb cardstock using the new Crimped Floral folder, and then went to work ink blending the panel on the de-bossed side. The inks used were SSS Pawsitively Saturated Inks in Lilac, Orchid and Amethyst. I’m not sure what this technique is called, but I then used a black ink pad to rub across the flat side of the panel, leaving the purple visible. Is it called like a “black-out” technique?! I have no idea!

I then trimmed the panel down and adhered it to a black panel using foam tape for added dimension. I cut the Simple Thanks once from silver cardstock, twice from black cardstock, and I cut the shadow portion twice as well. Those pieces were all adhered together using liquid glue before before being glued to the panel. I thought the card needed a little bling, so I added some PFS Purple Gems to the centers of the flowers.

That finishes up this one! It was a super simple card, but I like how it turned out! I haven’t tried the “black-out” technique before, but I’m pretty sure I’ll be doing it again. Don’t forget to check out the entire STAMPtember release over on Simon’s website. Thanks again for stopping by, and have yourself a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Floral Birthday Love STAMPtember Blog Party

Hello Crafty Friends, and welcome back! I’m so happy that you joined me for today’s HUGE STAMPtember blog party! Each stop throughout the party has a STAMPtember promotion, so you’ll want to check those out for sure! You can start your party experience here or by heading to Simon’s blog. My project is featuring the new Rustic Layering Flower in aqua tones with a hint of grey. This is such an awesome release, with so many more things coming during the month, so stay tuned for all of the excitement! Let’s go ahead and go through the details for my project!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by pulling an inspiration card from The Color Cubes, and then I ink blended a panel of Neenah 110lb cardstock using SSS Pawsitively Saturated Ink in Mist and Raindrop. Those two colors seemed to match the color palette best. Once the ink blending was complete, I cut the Rustic Layering Flower twice from that panel. I do a little more ink blending in the center of the flowers for more depth before assembling the flowers using liquid glue.

Now that I had the flowers, I had to decide on the rest of the card! I opted to go with the Whirl Diamond Plate for my background, and I cut a bunch of leaves from grey cardstock using the Budding Branches. In laying out the card, I decided that I needed one more small flower, so I cut that and assembled it as well.

I splattered my card base using TH Distress Oxide Spray in Hickory Smoke before adhering the background panel. I began adhering the grey leaves in place first using liquid glue, trimming down as necessary. Once I was happy with the leaf placement, I adhered the flowers using foam strips.

For the sentiment, I used the Mix & Match Butterflies set and stamped that using VersaFine Onyx Black and heat set it using Ranger Clear Embossing Powder. I trimmed it out using the coordinating dies, and made two additional cuts for a stacked sentiment. That was then adhered using foam strips as well. To finish up, I added some Surf Dazzling Gems and some silver metallic pearls to the “buds” of the branches.

That does it for this one! I hope you enjoyed it as much as I did! I always love working with die cut flowers, so this card was totally in my wheelhouse! Don’t forget to head on over to Simon’s website to check out the entire STAMPtember release! Thanks again for stopping by, and have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts