Tag: Fall Cards

Simon Says Stamp Halloween Bats

Hello Crafty Friends, and thanks for joining me! How’s your STAMPtember going? Today’s project is featuring the new Halloween Basics set along with the older Big Bat set. Let’s go ahead and run through the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by stamping the flying bats onto a panel of light blue cardstock using VersaFine Onyx Black ink and heat setting it with clear embossing powder. I actually did that step twice to achieve a smoother finish on the bats.

I then ink blended the edges of the stamped panel using Sky, Dusk, Night and Galaxy inks. Since I started with a light blue panel, I really only needed to ink the edges. I used a deckle edge die to trim the panel down before giving it a good dose of white splatter.

The sentiment, which is from the Big Bat set, was die cut once from black glitter cardstock and twice from regular black cardstock. I also cut a small bat from the glitter cardstock as well. The panel was adhered to the card base with foam tape, and the sentiment and bat were glued directly to the panel to finish up.

A pretty simple card for today! I don’t normally make Halloween cards, but I enjoyed the blue ink blending to create a somewhat night time scene. Don’t forget to check out the entire STAMPtember release! Thanks again for joining me, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day! Hey Friends! I’m back today with a project featuring the Layering Pine Sprigs from @simonsaysstamp latest release, And Everything Nice. You can find more details on my blog at redsas.co, if you’re at all interested. Hope you all have a wonderful Tuesday! Happy Wednesday, Friends! I’m back with a project featuring the new Snowy Hillside Embossing Folder from @simonsaysstamp latest release, And Everything Nice. You can find more details over on my blog at redsas.co. I hope you all have a fabulous day!

Spellbinders Falling Leaves

Hello Friends, and welcome back! Thanks for joining me to check out today’s project featuring the new Falling Leaves from Spellbinders and Kelly Bangs. This was a fun project, so let’s go ahead and run through the details.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by grabbing a panel of watercolor paper and some Simon inks. The colors that I chose to use were Guava, Honey, Pearfection and Clay. The process basically involved ink smooshing, using one color at a time. I smooshed the ink pad onto my glass mat and spritzed it with water, and laid the paper into the puddle. I repeated this process with each color, until I was satisfied and until my panel was covered. Once done with the inks, I dried the panel using the low setting on my heat tool.

I went ahead and die cut the leaves from the panel, die cut the stems from Peridot and Green Apple cardstock, and die cut the acorns from Desert Storm. I adhered the stems to some of the leaves and did some ink blending on the acorns using Gingerbread and Mocha inks. I assembled the acorns, added some detail with a brown colored pencil and set everything aside while I figured out the background.

The background was created using the Nested Postage Labels & Tag set, along with the Scribbled Letter Embossing Folder. I gold splattered the background, as well as some of the leaves to tie everything together. The sentiment was created using the new Documenting Labels set.

The background was adhered to the card base and then I began adhering to the leaves, tucking them in around the acorns. The acorns were adhered using foam tape, and the sentiment was secured with liquid glue to finish up.

That does it for this card. I hope you enjoyed it as much as I did! I really love how these leaves turned out! I still have some of my ink smooshed panel left, so I might have to create another card! Thanks again for stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day! Hey Friends! I’m back today with a project featuring the Layering Pine Sprigs from @simonsaysstamp latest release, And Everything Nice. You can find more details on my blog at redsas.co, if you’re at all interested. Hope you all have a wonderful Tuesday! Happy Wednesday, Friends! I’m back with a project featuring the new Snowy Hillside Embossing Folder from @simonsaysstamp latest release, And Everything Nice. You can find more details over on my blog at redsas.co. I hope you all have a fabulous day!

Simon Says Stamp Autumn Blessings

Hello Crafty Friends and welcome back! Simon’s latest release, Festive Fun, is live and I’m back today with a project featuring the new Abundant Leaf Background. Let’s go ahead and get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by cutting the Abundant Leaf Background two times from Neenah 110lb cardstock. While the die cuts were still in the panel, I did some ink blending using Honey, Latte, Limelicious, Melon and Zest inks. As you can tell from these colors, I was going for a fall vibe on this one. You’ll see later on where I did a more springy version. Once the ink blending was complete, I cut the stems apart so that I could arrange them how I wanted.

My background was created using the Chunky A2 Scalloped Rectangles with a bunch of gold splatter. I began arranging the leaves in a side arch to determine what sentiment I might use. I cut the Grateful sentiment once from gold cardstock and twice from Neenah 110lb cardstock, and cut the shadow portion twice as well. All of those were adhered together using liquid glue and set aside while I assembled the card.

The background panel was adhered to the card base, and I began gluing the leaves to the panel. The sentiment was adhered using foam strips and I added this sub-sentiment, which is from the new Gratitude Sentiment Strips, using foam strips as well. I used the included smaller die to cut green “berries” and added those to the card, as well as some gold metallic pearls in some spaces for some added shine.

That does it for this one! I hope you enjoyed it as much as I did! Don’t forget to head over to Simon’s website to check out the entire Festive Fun release! Thanks so much for stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Give Thanks Pumpkin

Hello Crafty Friends, and welcome back! Simon’s STAMPtember release has dropped, and I’m curious what your favorites are? If you know me, you know that the florals and leaves are my favorites! Today’s project is featuring the new Give Thanks & Eat Pie set that I used in a different way. Let’s run through the details, shall we?

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

This stamp set really isn’t my style, but I had the idea of putting the pilgrim hat on top of a pumpkin, so that’s the direction that I went! I began this project by die cutting the SSS Layered Pumpkin from Neenah 110lb cardstock, assembling the pumpkin and ink blending it using SSS Pawsitively Saturated Ink in Cantalope, Sherbet and Nutmeg.

I also die cut some leaves from green and brown cardstock using the SSS Lush Leaves and the SSS Arching Leaf Border. Those were ink blended as well using Artichoke and Mocha ink. I stamped the pilgrim hat, which is a layered stamp set, using the Mocha ink along with Clay, Buttercream and Black. Once the stamping was done, I fussy cut the hat and set that aside. I needed another smaller pumpkin and a sentiment, so I went to the SSS Happy Fall Y’all set and stamped those elements using VersaFiny Onyx Black ink and heat set them using Ranger Clear Embossing Powder. Those were cut out using the coordinating dies and set aside as well. In trying to link to the Happy Fall Y’all set, it would appear that this set has been discontinued, unfortunately.

The background panel uses the SSS Stitched Whirl Background along with some splatter from TH Distress Mica Spray Crooked Broomstick. Now to assemble the card! I began by gluing the background leaves in place first and then the large pumpkin, and next were the other leaves. The smaller pumpkin was tucked in and glued in place, while the hat and the sentiment were adhered using foam strips. The panel was then adhered to a brown panel before being adhered to the card base to finish up.

That finishes up this project! Not all stamp sets are going to be your style, but it’s fun to think of different ways to use the elements. Don’t forget to head on over to Simon’s website to check out the entire STAMPtember release! Thanks again for stopping by, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts