Tag: SSS Sunny Vibes

Simon Says Stamp Divine Peony

Hello Crafty Friends, and welcome back! I’m so glad that you stopped by! I’m back today with a card featuring some new products from Simon’s latest release, Sunny Vibes. Let’s get right into the details, shall we?

Main Products:

I began this project by die cutting the SSS Divine Peony three times from Neenah 110lb cardstock. I cut it three times, but only used two of the larger flowers for this project. I did some light ink blending using SSS Pawsitively Saturated Inks in Bubblegum, Carnation, Celery, Pearfection and Sunbeam. Once the ink blended was complete, I assembled the flowers and set those aside with the leaves, while I worked on the rest of the card.

I knew that I wanted a black on black background, so I stamped the SSS Orchid Rose Bouquet onto a panel of black cardstock using VersaMark ink and heat set that using Ranger Clear Embossing Powder. I also stamped the sentiment from the SSS Just Breathe set onto a scrap of black cardstock using the same ink, and heat set that using Ranger Princess Gold Embossing Powder. I used the coordinating die to trim out the sentiment, along with two additional cuts, and adhered all of those together using liquid glue.

I used two dies from the SSS Postage Stamp Edge Frames to cut a frame from black cardstock. The frame was adhered to the stamped panel using SSS 3D Foam Strips, and I trimmed off the excess around the edges. The leaves were glued in place, along with the buds, and the flowers were secured with the foam strips. The sentiment was also adhered with foam strips, and some clear drops were added to finish up. I didn’t want a white border showing from the card base, so I added a black panel, and then secured my floral panel atop that.

That does it for this one. I hope you enjoyed it, and I hope it inspires you to get crafty in your space! Thanks again for stopping by, and don’t forget to stay awesome, friend!

Other Products:

* Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue posting crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Banner Daisy

Hello Friends, and welcome back! Today’s card is featuring the new Little Banner Basics from Simon’s latest release, Sunny Vibes. Have you checked out the new release yet? I’d love to know your favorites in the comments! Let’s run through the deets for this one!

Main Products:

I began this card by die cutting the SSS Charming Daisy from some Neenah 110lb cardstock and doing some ink blending using SSS Pawsitively Saturated Inks in Celery, Citrine and Pearfection, along with SSS Rainbow Splash Gravel ink.

For the background, I used the SSS Dibble Dot Embossing Folder and embossed a panel of black cardstock and ran a brayer over the raised portion using Hero Arts Unicorn White ink. I then used the TH Paper Distresser to rough up the edges of the panel for a little added interest.

I used the miss you sentiment from the new SSS Little Banner Basics set, die cut the sentiment twice from Neenah 110lb cardstock, cut the shadow portion twice from black cardstock and adhered all of those pieces together with liquid glue. I adhered the black panel to the card base using foam tape, glued the flower pieces in place and adhered the sentiment atop that using SSS 3D Foam Strips.

That does it for today’s card! It’s a super simple one, but I like how the white over the background came out! Thanks again for stopping by, and I hope you have an amazing day! Stay awesome, friend!

Other Products:

* Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allow me to continue posting crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Just A Note Zinnias

Hello Crafty Friends, and welcome back to my blog! I hope you all are doing well and that your summer is off to a great start! The latest Simon release, Sunny Vibes, in live and I’m back today with a card featuring the new Zippy Zinnias Embossing Folder with Cutting Die. Let’s jump right into the details, shall we?

Main Products:

I began this project by embossing a panel of Neenah 110lb cardstock using the new SSS Zippy Zinnias Embossing Folder. I then embossed another panel and using the included dies to cut out the corresponding flowers. I colored the die cut flowers with a light pink colored pencil, and then decided that some ink blending would be better.

The inks used for the ink blending were SSS Pawsitively Saturated Inks in Bubblegum and Carnation. I also used Sprout on the background for the embossed panel. The centers of the flowers were colored using Copic Markers Y38 and YR27 to achieve the orange and brownish colors. Before adhering the die cut flowers to the panel using SSS 3D Foam Strips, I splattered the panel with some gold acrylic ink for some added interest.

I used the SSS Just a Note 2 for the sentiment and cut that once from gold cardstock and once from Neenah 110lb cardstock. I also die cut the shadow twice using the same cardstock, and adhered all of those pieces together using liquid glue. The sentiment was then adhered using foam strips, and the panel was adhered to the card base with foam tape as well for added dimension. To finish up, I added some PFS Gold Metallic Pearls, because every card needs a little bling, in my opinion.

That does it for this one! I hope you enjoyed it, and I hope it inspires you to get creative in your space! Don’t forget to check out the entire Sunny Vibes release over on Simon’s website! I’d love to know your favorites in the comments! Thanks again for stopping by, and I hope you have a wonderful day!

Other Products:

* Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which helps me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp This Blows

Hello Crafty Friends, and welcome back to my blog! I’m back today with a fun project featuring the new Reverse Bad Day Good Vibes Sentiment Strips from Simon’s latest release, Sunny Vibes. This card might not be for everyone, but it totally cracks me up! Let’s run through the details!

Main Products:

I began this project by die cutting the SSS Oh Expletive once from SSS Black Glossy cardstock and twice from black cardstock. I also cut the shadow portion of the die twice from black and adhered all of those layers together using liquid glue.

Once the main sentiment was complete, I pulled a piece of patterned paper from the Tim Holtz Abandoned pad and used the SSS Postage Stamp Edge Frames to trim that down. I then rubbed Simon Mocha ink along the edges for a more distressed feel. Before adhering the panel to the card base with foam tape, I splattered it with Ranger Distress Mica Stain in Crooked Broomstick.

The main sentiment was adhered using SSS 3D Foam Strips for added dimension, and I added the sentiment strip just below using the same strips. This card was super simple, but it makes me laugh, and I love that! I thought this sentiment strip paired well with the main sentiment.

That does it for this one! I hope you enjoyed it! Thanks again for stopping by, and don’t forget to stay awesome, friend!

Other Products:

* Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Sunny Vibes Blog Hop Day One

Hello Friends, and welcome back! Today I’m participating in Day One of a Simon Says Stamp Blog Hop to celebrate the latest release, Sunny Vibes! Be sure to follow along the hop and comment along the way for your chance to win a $25 SSS gift card! Who doesn’t love gift cards, am I right?! There’s also a free gift with any $50 purchase. Just enter the code HELLO during checkout to receive this freebie! I’ll list the Blog Hop order at the end of my post so that you can follow along. And don’t forget, there will be a Day Two of the Blog Hop happening as well! Even more chances to win! My card today is featuring the new Gentle Layers Floral Wreath, along with the new Little Banners Basics. So, let’s run through the details!

Main Products:

I began this project by die cutting all of the pieces of the wreath from Neenah 110lb cardstock and doing some ink blending using SSS Pawsitively Saturated Inks in Sprout, Seafoam, Lilac, Sunbeam, Honey, Dew and Aspen. Once all of the ink blending was complete, I adhered the pieces together with liquid glue and adhered those to the wreath.

For my background panel, I used the SSS Wistful Leaves Embossing Folder and embossed a panel of Neenah 110lb cardstock and then splattered it with gold acrylic ink for added interest. I always say this, but I felt like I needed more leaves, so I used the SSS Winsome Branch and cut some of those from white and gold cardstock. The wreath was glued to the embossed panel and I tucked the extra leaves in place and secured those with a bit more glue.

I used the Hello sentiment from the new SSS Little Banners Basics set and cut the banner from Neenah cardstock and cut the shadow portion from gold cardstock, adhering those with glue and then adhering it to the panel with SSS 3D Foam Strips. To finish up, I adhered the panel to the card base with foam tape before adding some PFS Gold Metallic Pearls.

That does it for this one! I hope you enjoyed it, and don’t forget to join in the Blog Hop for your chance to win! Thanks again for stopping by, and I hope you have an amazing day! You can follow along the Hop below.

Hop Order:

Simon Says Stamp Blog 

Nina-Marie Trapani

Caly Person

Jennifer McGuire

Suzy Plantamura

Amy Rysavy

Debby Hughes

Lisa Addesa

Alberto Gava

Barb Engler

Kath Stewart

Karin Åkesdotter

Jean Doeringsfeld

Tracy Ware

Daniel West

Other Products:

* Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which helps me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Paper Hug Leafy Cluster

Hello Crafty Friends, and welcome back to my blog! I appreciate you stopping by to check out today’s project featuring the new Bad Day, Good Vibes stamp set, from Simon’s latest release, Sunny Vibes. I’m pairing it with the Friendship Leafy Cluster product suite, which is a favorite of mine. Let’s go ahead and get to the details!

Main Products:

I began this project by stamping the leaves from the SSS Friendship Leafy Cluster set onto a panel of Neenah 110lb cardstock using VersaFiny Onyx Black ink and heat setting it using Ranger Clear Embossing Powder. I did stamp several leaves, because I really wasn’t sure where this card was going. Once the stamping was done, I used the coordinating stencil to add color using SSS Pawsitively Saturated Inks in Bubblegum, Carnation, Lemonade and Citrine.

Once satisfied with the ink blending, I used the coordinating die to trim out the leaves. I did cut five more leaves from Neenah 80lb cardstock and adhered all of those together with the ink blended leaf with liquid glue for LOTS of dimension! Next, I took a panel of Neenah 110lb cardstock and foiled the SSS Mini Slimline Falling Dots Foil Plate. Unfortunately, I believe Simon must have discontinued this plate, because I was unable to locate it on their website. My apologies for that .. I will link to a similar product. I did have to foil the panel twice to cover the size of panel that I wanted. I then used the SSS Postage Stamp Edge Frames to trim it down.

I stamped this super cute sentiment from the new SSS Bad Day, Good Vibes set using the same Onyx black ink and the same embossing powder and used my Brother Scan n Cut to trim it out. I adhered the foil panel to the card base using SSS Dot Tape Runner, and the leaf was glued directly to the panel, while the sentiment was adhered using SSS 3D Foam Strips to match the thickness of the leaf.

That does it for this one! I love this leaf, and I love the colors along with the cute foiled dots! Like I said, this set is a definite favorite of mine. I hope you enjoyed this project too, and I hope it inspires you to get crafty in your space. Thanks again for stopping by, and I hope you have a fabulous day!

Other Products:

* Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts