Simon Says Stamp Black Out Peony

Hello Friends, and welcome back to my blog! Today’s project is once again featuring the Peony and Bells Embossing Folder and Die from Simon’s latest release, Always There. Let’s get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by embossing the folder onto a panel of Neenah 110lb cardstock and ink blending using Bubblegum, Carnation and Celery inks. Once satisfied with the ink blending, I used a black ink pad to rub over the raised portion of the panel.

The sentiment was stamped onto black cardstock using VersaMark ink and heat set using white embossing powder. I used the coordinating die to trim it out three times for a stacked sentiment.

The sentiment and dew drops were secured with liquid glue to finish up this project. A super simple project, but I love the look of the black next to the pink and green!

Thanks for stopping by to check out this project! Be sure to check out the entire Always There release over on Simon’s website. Have yourself an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Thanks Floral Hexagon

Hello Crafty Friends, and thanks for joining me! Today’s project is featuring the new Elongated Hexagons from Simon’s latest release, Always There. When I saw these hexagons, I knew that I wanted to create a floral card, because that’s what I do! Florals are my jam, and I just can’t help that! Let’s go ahead and go through the details for this project.

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began the project by die cutting my florals using the Aurora Blooms, which I happened to pick up while I was at CREATE. I did some ink blending on the flowers using Seafoam, Surf, Mint and Sun-kissed inks. Those were then assembled and set aside while I worked on the other elements of the card.

I die cut a frame using the Elongated Hexagons, added some light ink blending using the Seafoam ink and embossed that center portion using the Tiny Floral Embossing Folder. The Thanks, which is from a retired set, was cut once from gold cardstock and twice from Neenah for a stacked look, which we all love! Before assembling the card, I did some heavy white splatter on the leaves for some added interest.

The card base was gold splattered and the hexagons were adhered using liquid glue. The leaves were secured with glue as well, while the flowers were adhered using foam tape. The sentiment and gold pearls were added to finish up this project.

That does it for this one! I hope you enjoyed it, and I hope you’ll swing by and check out the entire Always There release. Thanks for stopping by!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Peony Hello

Hello there, and welcome back to my blog! The Always There release from Simon is live, and I’m back with a post featuring the new Peony & Bells Embossing Folder with Cutting Die. Let’s go ahead and get right into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by embossing the peony onto a panel of Neenah 110lb cardstock. I also cut a scrap of watercolor paper and embossed the die cut pieces with that. I used a water brush along with Bubblegum and Carnation ink to add color to the flowers. I just smooshed the ink onto my glass mat and dipped the brush there.

Once I was finished with the watercoloring, I used Copic markers G43, RV00 and RV10 to add color to the stems and other flowers. Before adhering the die cut flowers to the panel, I did some gold splatter for a bit more interest.

The large flower was adhered using foam tape, while the smaller flower stem was added with liquid glue. The sentiment, which is from a retired set, was cut once from gold cardstock and twice from Neenah 110lb for a stacked sentiment. That was secured with glue, along with a few dew drops to finish up.

That does it for this project. I hope you enjoyed it, and I hope you’ll stop by and check out the entire Always There release over on Simon’s website. Thanks for stopping by, and have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Artsy Butterflies Text

Hello Friends, and welcome back! I’m so glad you stopped by today to check out this project featuring the Artsy Butterflies. Let’s get right into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

If you’re like me, you’re hoarding patterned paper like it’s never going to be made again, am I right?! I decided that I would part with a little bit of it, and stamp the Artsy Butterflies onto a panel of pastel marble paper from P13 using VersaFine Onyx Black ink and heat set it with clear embossing powder. I then used the coordinating dies to trim them out, along with a black layer as well. I will link to a similar patterned paper at the bottom of this post.

The background is a combination of things with the bottom layer being a panel of ColorBlend cardstock that was black splattered and then a panel of Dina Wakely transparency that I smeared with Distress Paint.

The sentiment was stamped using VersaMark ink, heat set using detail white embossing powder and trimmed out with three additional cuts for a stacked sentiment. I adhered the black butterfly to the stamped butterfly using foam squares, and then those were adhered to the transparency using strong double sided tape. To adhere the transparency to the colored panel, I put some strips of the same tape on the backside underneath the butterflies so that you wouldn’t be able to see it. The sentiment was secured with the same tape as well.

That does it for this project. I hope you enjoyed it, and I hope you have a great day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Grateful Heart

Hello Friends, and welcome back! Today’s post is featuring the new Crocus Duo from Simon’s latest release. This ended up being a twofer project, but I’m only writing about one of them today, so let’s go ahead and go through the details.

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I knew that I wanted my Crocus flowers to be purple, so I die cut the flowers several times from three different colors of purple cardstock. Once I had cut all of the flowers, I did some ink blending on them using Crocus and Lilac inks, and assembled them. The flowers are only two layers, but I cut an additional layer to be adhered to the back. While I was cutting, I did cut the stems and grass from green cardstock.

My background was created using a very old Simon background stamped onto a very pale blue cardstock using VersaMark Ink and heat embossing it with white powder. This is where the twofer part comes in to play. I die cut that blue panel using the Whirl Diamond Plate, but only used the inner circles for this project. I also die cut a panel of Moonflower cardstock using that same plate. Before assembling this part, I decided that I wanted those inner circles black splattered.

This background ended up being a little bit of work, but I think it was worth it in the end. I went ahead and glued the Moonflower panel to the card base, and inlaid the splattered blue circles. After playing with the flower arrangement, I decided that it might be pretty to add some grass pieces that were similar to the other cardstock colors that I was using.

The flowers were adhered using foam tape, while the stems and various leaves were secured with liquid glue. The sentiment was stamped, white heat embossed, trimmed out and adhered to the panel with glue as well. To finish up, I added some dew drops for added interest.

That does it for this project. I hope you like it! I’ll post the other project using the rest of the background at some later date. Thanks again for stopping by, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Braided Greetings

Hello Crafty Friends, and thanks for joining me! Today’s projects are featuring the new Braided Embossing Folder from Simon’s latest release, In My Heart. These were super simple, so let’s quickly run through the deets!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began by running the embossing folder through the machine using Neenah cardstock to create two panels. I then did some ink blending on the panels using Carnation, Cadette, Surf, Limelicious, Sherbet and Orchid. Or at least that’s what I think that I used! I’m always really good about writing everything down, so I’m not quite sure what happened with these projects!

The sentiments were stamped using VersaMark ink, heat embossed using Detail White Embossing Powder and trimmed out four times for a stacked sentiment. I was unable to find one of the sets on the Simon website, so I assume that it was discontinued. I’m sorry about that, and I’m sad, because that was a really great set! The panels were trimmed down, adhered to a black panel and then the card base. Since the sentiments were stacked, I just went ahead and secured those using liquid glue to finish up.

Two quick cards for the win! These types of embossing folders are great for super quick cards, in my opinion. They look great ink blended with a simple sentiment. Thanks again for stopping by, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Cute Duckling

Hello Friends, and welcome back! Today’s post is featuring the new Cute Duckling from Simon’s latest release, In My Heart. Let’s go ahead and run through the details for this one.

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the pieces for the duckling from colored cardstock and adding some ink blending using Honey ink. I assembled the pieces and set that aside while I worked on the rest of the card.

The background was created using the A2 Postage Rectangles with some black splatter for added interest. The sentiment was stamped using VersaMark ink, heat set using white embossing powder and trimmed out several times for a stacked look. The panel was adhered to the card base, the sentiment was glued in place and the duckling was added with foam tape for added dimension.

That’s it for this one! A super quick, clean and simple card! Don’t forget to swing by and check out the entire In My Heart release over on Simon’s website. Thanks again for stopping by, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Watercolor Wild Rose

Hello! Hello! Thanks so much for swinging by to check out today’s project featuring the new Wild Rose stamp set from Simon’s latest In My Heart release! Let’s get into it!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by stamping both of the florals onto a large panel using VersaFine Onyx Black ink and heat setting them with clear embossing powder. I then did a very loos watercolor wash over both and went back in with darker details and shadowing. Once everything was dry, I fussy cut both images, as I did not have the coordinating dies.

The background panels were created with black splatter and the Nested Stitched Rectangles. Both sentiments were stamped with VersaMark Ink, heat set using Detail White Embossing Powder and cut multiple times with the coordinating dies.

The florals were adhered using foam tape, while the sentiments were secured with liquid glue. I thought some clear drops were a nice finishing touch.

That does it for this one! I’m not very good at watercolor, but I enjoy it when I do give it a try. Don’t forget to check out the entire In My Heart release, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Striped Missing You

Hey There! Thanks so much for swinging by! Today’s project is featuring the new Missing You die from Simon’s latest release, In My Heart. It’s a super quick one, so let’s go ahead and go through the deets!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I already had a striped little panel in my stash that I had been saving for a card just like this! It was made using scrap cardstock and double sided tape. I went ahead and cut the Missing You from that little panel, cut it three times from black and adhered all of them together, offsetting the black ever so slightly.

My background panel was created using the A2 Nested Stitched Rectangles, a stamp from the Tim Holtz Brushstrokes set and Seafoam ink. The sentiment was adhered to the panel using liquid glue, and my card base was splattered with some Surf ink before the panel was adhered.

See, a super simple project for today! This was my first time using this Brushstrokes set, and I really kind of like it! It adds just the right amount of something behind a sentiment. Don’t forget to swing over to Simon’s website and check out the entire In My Heart release. Thanks again for swinging by, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Best Mom

Hello Crafty Friends, and thanks for stopping by! I’m back today with a project featuring the new Best Mom Background stamp from Simon’s latest release, In My Heart. Let’s go ahead and get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by stamping the background onto a panel using PFS Misty Coast ink. My next step was to create a frame using the older Stitched Rectangles set. The flowers were cut from Neenah using the Hanging Leaf Ring set and the leaves from that set were cut using Smoke cardstock, while the Budding Branches were cut from Fog cardstock.

The flowers were ink blended using Bubblegum and Carnation inks. I applied different pressures to achieve different levels of ink intensity. The sentiment was stamped using VersaFine Onyx Black ink and double heat embossed for a smoother finish. Unfortunately, I was unable to locate this particular stamp set on the Simon website, but they have other great sets for Mother’s Day. I’ll link to one that is very similar for your convenience. That was cut several times using the coordinating die for a stacked look, which I love.

Before the assembly process, I adhered a clear drop to the center of each flower for added interest. The background panel was trimmed down, the frame was adhered using foam tape, the leaves were added and then the flowers. The sentiment was secured with foam tape, with a few more flowers added around that and clear drops were added to the branches to finish up.

That does it for this project! I hope you enjoyed it! It was a labor of love, because I kept thinking of how much I would have loved to give this card to my Mom while I was making it. Anyhoo, I appreciate you stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts