Tag: stamping

Just Because Butterflies

Hello Friends, and thanks for joining me! I could not wait to get my hands on the newest Pinkfresh Studio washi tapes! They were delivered a couple of days ago, and I immediately started creating with them! For this card, I’ll be combining my two favorite companies, Pinkfresh and Simon Says Stamp. So, let’s get in to the details, shall we?

Main Products:

I began this project by adhering the washi tape to panels of Neenah 110lb cardstock. I’m using the PFS Fluttering Butterflies and the PFS Vines and Roses washi tape, along with the coordinating dies. Once all of the pieces were cut, I began on the rest of the card.

I used the PFS Sparkling Diamond to cut a panel of Neenah 110lb cardstock, and did some light ink blending using PFS Ballet Slipper ink. I also used the SSS Stitched Squares to cut some frames for interest. The squares were adhered to the ink blended panel using SSS 3D Foam Strips, and I then played around with the placement of the flowers to decide on the look of the card.

Every floral needs additional leaves in my opinion, so I used the SSS Budding Branches for that. I began adhering the floral pieces using liquid glue, and adding the white leaves in between the layers. I did end up trimming off some of the white leaves, but reserved those for adding back in at the end.

The sentiment is from the Spellbinders A little Message Sentiments that was created using the BetterPress Letterpress System, along with black ink. I used the included coordinating die to cut several pieces and adhered all of those together for a stacked look. The butterfly was adhered to the frames, and I used PFS Gold Metallic Pearls to add to the “budding” portion of the branches. The whole panel was then adhered to the card base using SSS Dot Tape Runner to finish up.

That does it for this one! I hope you enjoyed it, and I hope it inspires you to get crafty in your space! If you’ve never tried the PFS washi tapes, I highly encourage you to do so! They are so simple to work with, and the end result projects are so very beautiful and effortless! Thanks again for joining me, and I hope you have a wonderful day! Don’t forget to stay awesome!

Other Products:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Sympathy Flowers

Hello Crafty Friends, and thanks for stopping by! I’ve been busy working on projects for Simon’s latest release, Be Bold. Have you checked it out yet? I’d love to know your favorites from this release! Today’s project is featuring a new floral stamp set called Wild & Free Flowers. While this is a gorgeous set, it will not be the focal point for this project. I opted to use it as a background instead. Let’s run through the details, shall we?

Main Products:

I began this project by stamping one of the florals from the SSS Wild & Free Flowers onto a panel of Neenah 110lb cardstock using PFS Misty Coast ink. I then used the PFS Stitched Rectangles to trim it down. Then, I went to work on the focal point for this card.

I die cut the SSS Etched Magnolia Blossom and a few SSS Budding Branches from scraps of Neenah 110lb cardstock, and did some very light ink blending on the magnolia using SSS Pawsitively Saturated Ink in Bubblegum. Once the ink blending was complete, I adhered the pieces together with liquid glue, after cutting the center of the flower from black cardstock.

I also used SSS Fog cardstock to cut a few flowers using the SSS Fine Floral Stem, and used some pink cardstock to cut a few flowers using the SSS Mini Flowers & Leaves set. Those were adhered together and set aside while I continued to work on the remaining pieces of the card. I die cut the sentiment from the SSS Handlettered Greetings set using SSS Black Glossy cardstock, and adhered that directly to the stamped panel.

Next, I played around with the placement of the flowers and leaves and began gluing the leaves in place first, then the grey flowers were next, and the magnolia was adhered atop all of that using SSS 3D Foam Strips. Some of the leaves were cut and tucked in where needed, and I glued white pearls to all of the areas with a little stem. The panel was then adhered to a black panel before being adhered to the card base.

That finishes up this project! I hope you enjoyed it, and I hope it inspires you to get crafty in your space! Don’t forget to check out the entire Be Bold release! Thanks again for stopping by, and have a wonderful day!

Other Products Used:

* Affiliate links used at no cost to you! Thanks so much for your support.

Latest Posts

Latest Instagram Posts

Simon Says Stamp Hello Cherry Blossoms

Hello Crafty Friends, and thanks so much for joining me! I’m back today with a project featuring the new Cherry Blossom Embossing Folder from Simon Says Stamp’s latest release, Be Bold. There’s a lot going on with this card, so let’s get to the details!

Main Products:

This card begins with cutting some white flowers using the included die from the SSS Cherry Blossom Embossing Folder. Once I had quite a few cut, I placed them inside the folder and ran them through the machine to add the embossed texture to them. I then did some light ink blending on them using SSS Pawsitively Saturated Inks in Bubblegum, Lilac, Lemonade, Marine, Seafoam, and Melon.

I then used the SSS Etched Eucalyptus Wreath and cut three of those from Neenah 110lb cardstock. While I was cutting, I went ahead and cut a bunch of leaves using the SSS Eucalyptus Leaves die from Neenah 110lb cardstock and gold cardstock, and I used the SSS Stitched Squares to cut one of those.

The background was created using the SSS Stitched Whirl Background and some gold acrylic ink splatter. As you can imagine, there was a lot of playing around with placement on this card! I adhered the three eucalyptus wreaths together using liquid glue and set that aside. I placed SSS 3D Foam Strips on the back of the square and decided placement of the leaves, and began gluing those in place. Some leaves had to be trimmed, and I reserved those to tuck back in where needed.

The square was then adhered to the panel and the wreaths were adhered atop that using a combination of liquid glue and foam strips for support. I glued a few flowers to the wreath and tucked in the remaining flowers here and there, along with the reserved white and gold leaves. I die cut the SSS Simple Hello once from gold cardstock and four times from Neenah 110lb cardstock and glued all of those together with liquid glue. I don’t normally make my sentiments that thick, but I knew it was going to need additional support, because it was going to be adhered atop the wreath with very few connect points.

I glued the Hello in place, and added some PFS Gold Metallic Pearls to the flower centers for added interest. The entire panel was then adhered to the card base using foam tape. Needless to say, this card is quite thick, but I love how it turned out!

Don’t forget to check out the entire Be Bold release over on Simon’s website! Thanks again for joining me, and I hope you have a fabulous day!

Other Products:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Splendid Leafy Birthday

Hello Crafty Friends, and welcome back! I’m so glad that you’re here! Today’s project is featuring the new Splendid die, and the Splendid Sentiments Stamp set from Simon’s latest release, Be Bold. Let’s get right in to it!

Main Products:

Check out my very first You Tube Short!

I always say, Die Cutting is My Jam, so maybe this should become a series! I like creating backgrounds with unexpected dies, and today’s card does just that! I took the SSS Splendid die and cut a bunch of those from Neenah 110lb cardstock, and cut it once from gold cardstock. I also cut a panel using the PFS Diagonal Stitched Rectangles to use as the background. I had to play around with the placement before committing to adhering the words onto the panel with liquid glue.

Once all of the white words were adhered to the panel, I trimmed off the excess and glued the gold sentiment in place. I used the SSS Splendid Sentiments and stamped the additional sentiment using VersaMark Ink and heat set those using Ranger Princess Gold Embossing Powder. I trimmed those down and adhered them to the panel using SSS 3D Foam Strips.

I used the SSS Abundant Leaves to cut those from Neenah 110lb cardstock and did some ink blending using SSS Pawsitively Saturated Inks in Sprout and Seafoam. Those were then adhered to the panel with liquid glue as well. The panel was adhered to a black panel for contrast before being added to the card base. For some additional bling, I added some PFS Gold Metallic Pearls to finish up.

That does it for this installment of Die Cutting is My Jam! I like the sound of that! Anyhoo, I hope you enjoyed this project, and I hope it inspires you to get crafty in your space. Thanks again for joining me today, and don’t forget to stay awesome, friend!

Other Products:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Mother’s Leafy Cluster

Hello and welcome back crafty friends! I’m so glad that you stopped by to take a look at today’s project featuring the new Mother die from Simon’s latest release, Be Bold. Let’s go ahead and run through the deets for this one, shall we?

Main Products:

I began this card by selecting a color combo from The Color Cubes and stamping the SSS Leafy Cluster onto a panel of Neenah 110lb cardstock using VersaFine Onyx Black ink and heat setting that with Ranger Clear Embossing Powder. I then used the coordinating stencils to do the ink blending using SSS Pawsitively Saturated Inks in Blush, Petunia and Watermelon, along with Pinkfresh inks in Atlantis and Metropolis. Once the ink blending was complete, I used the coordinating dies to cut them out.

I cut the SSS Mother die once from SSS Matte Silver cardstock and twice from Neenah 110lb cardstock, and I also cut the shadow portion of the die twice and well. All of those pieces were adhered together using liquid glue and set aside while I worked on the remaining elements of the card. I always seem to need more leaves on my cards, so I opted to use the SSS Etched Meadow Flower and Leaves, along with the SSS Flower Bundle and cut some of those using the same matte silver cardstock.

For the background, I used the PFS Diagonal Stitched Rectangles to cut a panel of black cardstock, and splattered it using white acrylic ink. I then used the SSS A2 Thin Frames to cut a frame from the same silver cardstock. Now for the assembly! I glued the silver frame in place, glued the silver leaves in place and then glued the Leafy Clusters in place.

The sentiment was also glued in place. I chose a sub-sentiment from the SSS Reverse Love Sentiments Strips and adhered that using SSS 3D Foam Strips so that it would match the height of the main sentiment. I added a few PFS Matte Silver Pearls before adhering the panel to the card base using foam tape.

That does it for this one! I really like this color combo, and am enjoying The Color Cubes, especially when I get stuck on putting colors together. I hope you enjoyed this project too! Head on over to Simon’s website to check out the entire Be Bold release! I’d love to know your favorites! Thanks again for stopping by, and don’t forget to stay awesome, friend! Have a wonderful day!

Other Products:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Appreciate You Lattice

Hello Friends, and welcome back! I’m so glad that you stopped by today! Simon Says Stamp’s latest release, Be Bold, is live, and today’s project is featuring a couple of new products! So, let’s run through the deets for this one!

Main Products:

I began this project by taping down the SSS Lattice Tile Stencil to a panel of Neenah 110lb cardstock, and did some light ink blending using SSS Pawsitively Saturated Ink in Bubblegum, Lilac, Seafoam and Sunbeam. Once the ink blending was complete, I used the PFS Diagonal Stitched Rectangles to trim it down. I also used the SSS A2 Thin Frames to cut a frame from matte silver cardstock. The frame was glued to the panel and set aside while I worked on the sentiment.

I die cut the SSS Appreciate You once from SSS Matte Silver cardstock, and I die cut the shadow three times from Neenah 110lb cardstock. I die cut the actual sentiment from one of the shadow pieces, and adhered all of those together using liquid glue. I then used glue and inset the silver sentiment into the shadow. I also used the SSS Olive Leaves to cut those for some added interest.

The leaves were adhered to the ink blended panel and the sentiment was adhered atop those using SSS 3D Foam Strips. I added some PFS Matte Silver Pearls to match the Matte Silver cardstock. This panel was then adhered to the card base using foam tape.

That does it for this one! Head on over and check out the entire Be Bold release! Thanks for stopping by, and don’t forget to stay awesome! Have a wonderful day!

Other Products:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Be Still Flower

Hello Crafty Friends, and welcome back! I’m so glad that you’re here! Today’s project is featuring the new Wild & Free Flowers set from Simon’s latest release, Be Bold. Let’s not waste any time, and get to it!

Main Products:

I began this card by stamping one of the florals from the SSS Wild & Free Flowers onto a panel of Neenah 110lb cardstock, using VersaFine Onyx Black ink and heat setting it using Ranger Clear Embossing Powder. I then colored the image using Copic Markers in G24, G85, G94, R83, R85, RV52 and Y18, along with PrismaColor Pencils for some extra shading.

Once the coloring was complete, I used the PFS Diagonal Stitched Rectangles to trim the panel down, before adhering it to a black panel with foam tape. I stamped the sentiment, which is from the SSS Tiny Words Faith set, using the same black ink.

I added some clear drops and “fake” black splatter using Copic Multiliner pens. Normally, I add real splatter, but I wanted control of where the black dots were placed, hence the use of pens. This panel was then adhered to the card base.

A pretty simple card for today. I hope you enjoyed this project, and I hope it inspires you to get crafty in your space. Don’t forget to head over to Simon’s website to check out the entire Be Bold release! Thanks again for stopping by, and I hope you have a fabulous day!

Other Products:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Sending Love XO

Hello Crafty Friends, and thanks so much for stopping by! I’m back today with a card featuring the new Acetate Hearts Foil Transfer Cards from Simon Says Stamp’s latest release, Sweetheart. This card is so simple, but I love the results that I got! Let’s run through the details!

To begin, I pulled out the Minc Mini and some pink foil. I cut a panel of foil while the Minc was heating up, and placed the acetate panel and the foil inside the transfer envelope and fed it through when the machine was heated and ready. I ended up using heat setting four because this yielded better results for me.

I trimmed a panel of patterned paper and applied small dots of glue on the back side of the Xs and Os, and then adhered that to the paper. This was then adhered to a panel of black cardstock for contrast.

I stamped the sentiment, which is from the SSS XL Love Greetings set, onto black cardstock using VersaMark Ink and heat set that using SSS Detail White Embossing Powder. I used the coordinating die to trim that out, along with two additional cuts and adhered all of those together using liquid glue.

The sentiment was adhered atop the acetate with glue and everything was then adhered to the card base using foam tape.

That does it for this card! Like I said, super simple! Using patterned paper can yield some amazing results and make it look like you spend hours on a project, when you really only spent a few minutes! I hope you like this project, and I hope it inspires you to get crafty, maybe even with some of your patterned paper! Thanks again for stopping by, and have a wonderful day!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Light Me Up

Hello Crafty Friends, and thanks for joining me today! Simon Says Stamp’s latest release, Sweetheart, is live and it has so many awesome things! I was lucky enough to get to play with the new Love Bulb die, and I just think it’s so cool! Let’s go through the details, shall we?

To begin, I die cut the SSS Love Bulb from Neenah 110lb cardstock, and colored the base and outline using Copic Markers in C2 and C5. For the “inside” of the bulb, I did some light ink blending using SSS Pawsitively Saturated Ink in Bubblegum. I removed the heart from the bulb and added Carnation Pink Nuvo Crystal Drops and set that aside to dry.

Moving on with the rest of the card .. I cut a panel of Neenah 110lb cardstock using SSS Postage Stamp Edge Frames and used the same Bubblegum ink for some light ink blending where the light bulb will be placed. I used the SSS Heart Stream die to make a “cord” for the bulb using SSS Holographic cardstock.

This cute little sentiment is from the SSS Light Me Up set. I stamped the sentiment on black cardstock using VersaMark Ink and heat set it using SSS Detail White Embossing Powder. I then used the coordinating die to trim it out. I also went ahead and cut two additional die cut sentiments and used liquid glue to adhere all of those together for a bit of dimension.

All of the elements of the card are cut and ready, so let’s assemble the card! I glued the Heart Stream along the top of the postage edge panel, and then glued the bulb underneath one of the hearts. The sentiment was then glued underneath the bulb and the heart was glued to the center of the bulb. This panel was then adhered to a card base using foam tape.

That does it for this one! It’s kind of a clean and simple card for me, which I never make, but I like the way this one turned out! To be completely honest, I wasn’t sure about the pink heart, but I decided to just go with it. Head on over to Simon and check out the entire Sweetheart release! I’d love to know your favorites! Thanks again for stopping by and stay awesome friend!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts