Tag: stamping

Pinkfresh Leafy Butterfly Bliss

Hello Friends, and thanks so much for joining me! I recently received a few new goodies from Pinkfresh and wanted to play! After creating my dark navy and gold card, I wanted to give a dark card another go! The Pinkfresh vibe is usually pastel, but you can create some serious gorgeousness using dark colors as well. This card is a combination of pastel and dark, and I hope you like it!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by gold foiling the Joyful Day Press Plate twice onto Neenah 110lb cardstock. I then used the coordinating stencils to add color using Aquamarine and Tidal Pond inks. Once that was done, I used the coordinating die cut to trim them out. I did go back and add some very light ink blending to the edges of the leaves, because I did not want the stark white edges against my dark background.

I then gold foiled the new Butterfly Bliss Press Plate onto Neenah and ink blended those using Soft Lilac, Sheer Freesia, Hydrangea, Lavender and Licorice inks. I die cut the butterflies using the coordinating dies along with a purple layer as well. Those two were adhered together and set aside.

The background was cut using the Double Stitched Rectangles from Forest cardstock and then gold splattered for some added interest. The sentiment, which is from the Joyful Day set, was gold foiled onto the same Forest cardstock and trimmed out along with two additional cuts for a stacked sentiment.

I adhered the green panel to the card base and I placed pieces of foam strips on the back of the ink blended leaves and adhered those in place, along with the butterfly, trimming off the excess. The sentiment was secured in place using liquid glue, as were the gold metallic pearls. I decided that I wanted some tiny flowers to adorn the leaves, so I cut some of those using Spellbinders Floral Spray from Teal Topaz and Plum cardstocks.

That does it for this project! I hope you enjoyed it! I really do love incorporating dark colors into a Pinkfresh project just to give it a different feel! Thanks again for stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Simon Says Stamp Hello Floral Tag

Hello Crafty Friends, and welcome back! So glad you stopped by to check out today’s post featuring the new Scalloped Floral Tag from Simon’s latest release, You Are My Favorite. Have you checked out the release yet? I’d love to know your favorites in the comments! Let’s get right into the details for this one!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the tag pieces from Neenah 110lb and gold cardstock. I then used the Hanging Leaf Ring set to cut flowers and leaves from Cotton Candy and Sage cardstock. I did some ink blending on those pieces using Bubblegum and Sage inks, and then assembled the flowers and added some Dazzling Gems to the centers.

I die cut the background using the Chunky A2 Scalloped Rectangles set, gold splattered that and set it aside to dry while I worked on the sentiment. I die cut the hello, which is from the Handlettered Greetings, once from gold cardstock and twice from Neenah, adhering them together for a stacked sentiment.

The background was adhered to the card base, the leaves were glued in place, the tag was adhered using foam tape and the flowers were adhered using a combination of liquid glue and foam strips.

That does it for this project! I hope you enjoyed it! Head on over to Simon’s website to check out all of the new products from the You Are My Favorite release! Thanks again for joining me, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Simon must have discontinued the Chunky A2 Scalloped Rectangles as well as the Handlettered Greetings, because I was unable to locate those on their site. My apologies on that. I will link to items that are similar for your convenience.

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Simon Says Stamp Welcome Baby

Hello Friends, and welcome back! Today’s post is featuring the new Duck Trio from Simon’s latest release, You Are My Favorite. I do want to note that I used a sentiment die cut that is no longer available, so I will link to something similar in the list below. Let’s get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the Duck Trio from Neenah 110lb, black and yellow cardstock. Once those were cut, I assembled the ducks and set them aside while I worked on the other elements of the card.

I die cut a background panel using the Nested Postage Labels & Tag and splattered that with black ink. The sentiment, which is no longer available, was die cut once from black glossy cardstock and three times from regular black, and adhered together for a stacked sentiment.

The sentiment was adhered to the background panel, trimming off the ends, while the ducks were adhered using foam strips for added dimension. Everything was then adhered to the card base to finish up.

That does it for this one! I hope you enjoyed it! My card was made into a baby card, but really, any sentiment of your choosing would work well too! Don’t forget to check out the entire You Are My Favorite release over on Simon’s website! Thanks for joining me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Simon Says Stamp Love & Hugs Botanical

Hello Friends, and welcome back to my blog! The latest Simon release, You Are My Favorite, is live and I’m back with a project featuring the new Big Botanicals. Let’s go ahead and get right into the details since this one had lots of steps.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by putting a panel of mixed media paper in my splat box and adding Distress Oxide Sprays and Spritzes until I was satisfied. The sprays used were Wilted Violet, Villainous Potion, Prize Ribbon and Rustic Wilderness. The Spritzes used were Wilted Violet, Twisted Citron and Peeled Paint. I did dry my paper between layers of color so that I could build upon each other.

Once satisfied with the panel, I stamped one of the florals from the Big Botanicals set onto the panel using VersaFine Onyx Black and heat set it using Ranger Clear Embossing Powder. I did use a couple of the other elements from the stamp set and added those as well. I also used the TH Stitches set for some other added elements. I also used the TH Digits stencil along with some Ranger Translucent Crackle Paste to add some texture.

I set that aside to dry while I worked on the other elements for the card. I stamped the sentiment, which is from the Mix & Match Butterflies set, onto black cardstock using VersaMark ink and heat set that using Simon Detail White Embossing Powder. It was trimmed out using the coordinating die several times for a stacked sentiment. I used the Stitching Butterflies set to cut and assemble one of the butterflies to add once everything was dry.

For even more texture, I used the TH Paper Distress tool to rough up the edges of the panel, and I used a water brush to paint the floral and dry it with paper towels to lift some of the ink from those areas. My panel was adhered to the card base with foam tape, while the butterfly and sentiment were adhered with foam strips.

That does it for this project! I hope you enjoyed it! I never do mixed media projects because I’m not very good at them, but I enjoy them just the same! Don’t forget to check out the entire You Are My Favorite release over on Simon’s website! Thanks again for joining me, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Spellbinders Just A Note Daisies

Hello Friends, and welcome back! Here’s another project featuring the Yana’s Daisies from the Spellbinders April releases. Let’s get right into the details, shall we?

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by die cutting the daisies once from Neenah 110lb cardstock and once from gold cardstock. I also cut the base layer from Neenah as well for the assembly. While the white petals were still in place, I did some ink blending on those using Morning and Heather inks.

I adhered the gold outline portion to the base layer using liquid glue, and then adhered the ink blended petals in place, along with the gold centers. The sentiment, which is from the Crafty Hugs Sentiments, was gold foiled onto Neenah and trimmed out several times for a stacked sentiment look.

My background panel was created using the Nested Postage Labels & Tag, and then splattered with gold acrylic ink. This panel was adhered to the card base, the daisies were adhered using foam tape and the sentiment was adhered using foam strips. I decided that I needed some additional leaves and cut those from the Club Blooms set using Neenah and gold cardstock. I added some clear drops to finish up this project.

I hope you enjoyed this one! The Yana’s Daisies products are super gorgeous and if you haven’t checked them out, I do encourage you to do so! Thanks for joining me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Simon Says Stamp White Fusion Thanks

Hello Crafty Friends, and welcome back! Today’s project is featuring the new White Fusion stencil from Simon’s latest Rain or Shine release. Let’s go ahead and jump into the details.

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by stenciling the White Fusion leaf onto a panel of Neenah 110lb cardstock using Simon’s Sage, Cabbage, Artichoke and Kale inks, along with Pinkfresh Eucalyptus ink. Once I was done with all of the stenciling, I fussy cut the leaf out, and added some gold detail with a Krylon Gold Leafing pen.

My next step was to cut a panel using the Postage Stamp Edge Frames and splatter that with gold acrylic ink. I die cut the Abundant Leaf Background from Green Apple cardstock and did some ink blending along the edges using those same green inks. I adhered the background panel to the card base using foam tape, and then adhered the White Fusion leaf with foam tape as well.

The Abudant Leaf Background was trimmed apart and secured with liquid glue underneath the larger leaf. I die cut the Simple Thanks once from gold cardstock and twice from Neenah 110lb and adhered all of those together before being adhered to the card. To finish up, I added some Pinkfresh Gold Metallic Pearls to pull everything together.

That does it for this project! I appreciate you stopping by, and I hope that you found a little bit of inspiration! Have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Spellbinders Birthday Daisies

Hello Friends, and welcome back! Spellbinders April releases are live and I’m back again today with another project featuring Yana’s Daisies. I previously posted a project that used just the petals from this project, so you’ll have to check that out. Let’s go ahead and get into the details, shall we?

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by die cutting Yana’s Daisies several times from Neenah 110lb cardstock. I knew that I wanted to use just the outline for this project, so I carefully trimmed the leaves off of the daisies. Once I was done with my cutting, I splattered the daisy outlines with black acrylic ink.

My background was created using Gravel cardstock along with the Nestled Postage Labels & Tag set. I did not want to have to cut the daisies again to get black centers, so I just used a black ink pad for that. I began adhering the daisy clusters with liquid glue, filling in all of the spaces and trimming off the excess. The sentiment was silver foiled onto black cardstock and trimmed out several times for a stacked sentiment.

The gray panel was adhered to a black panel, the sentiment was adhered using foam strips, the centers were added in place and clear drops were added to finish up.

That does it for this project! I hope you enjoyed it, and I hope it inspires you to get crafty in your space! Don’t forget to check out all of the April releases over the Spellbinders webpage. Thanks again for stopping by, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Spellbinders Feel Better Daisies

Hello Crafty Friends, and welcome back to my blog! The new April releases from Spellbinders are live, and I’m back today with a project featuring Yana’s Daisies! Yana makes beautiful florals, and I was so excited to be able to play with this collection! Let’s go ahead and go through the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by cutting Yana’s Daisies several times from Neenah 110lb cardstock. You’ll see in a later post where I use the outline of the daisies, but for this post, I wanted to use all of these petals that were leftover from that project! I picked out a bunch of the petals and did some light ink blending on those using Bubblegum ink. I also did some ink blending on the centers using Honey ink.

I retrieved some Press n Seal from the kitchen, and arranged the petals upside down around one of the centers, basically creating my own flower with the pieces. Once everything was arranged, I placed tiny pieces of foam tape on the back of the flower pieces. Once that was done, I arranged the flowers onto my panel, which I had previously splattered with gold acrylic ink.

I wanted some greenery for the flowers, so I die cut one of the leaves from the Club Blooms set from Green Apple cardstock and did some ink blending using Artichoke ink. I tucked those under the petals and secured them in place with liquid glue.

The sentiment, which is from the You Are Everything Sentiments set, was gold foiled and trimmed out several times with the coordinating die and adhered atop the panel with foam strips. To finish up, I added some Gold Metallic Pearls for some added shine.

That does it for this project! I thought this project was going to be a lot more tedious than it was, and I think that was because of the Press n Seal! Don’t forget to head on over to Spellbinders to check out all of the April releases! Thanks again for joining me, and have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Simon Says Stamp Thank You Blossom

Hello Friends, and thanks so much for stopping by! I’m back with a project featuring the new Thank You Basics from Simon’s latest release, Rain or Shine. Let’s go ahead and go through the details for this one.

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the Elegant Blossom Branch from Neenah 110lb cardstock and ink blending the pieces using Guava, Limelicious and Pearfection inks. I did cut the stem portion two additional times and adhered those together, along with the pieces of the flowers with liquid glue.

The background was cut using the Postage Stamp Edge Frames, which is one of my favorites, and then splattered using gold acrylic ink. Once dry, I stamped the sentiment from the Thank You Basics set using VersaFine Onyx Black ink and heat set it with Ranger Clear Embossing Powder. The panel was then adhered to the card base using foam tape, the stem was glued in place and the flowers were adhered with additional pieces of foam tape. To finish up, I added a few clear drops for some shine.

That does it for this one! I really love the clean and simple look of this card. Clean and simple doesn’t always come easy for me, so I do enjoy when an idea comes together! Don’t forget to check out the entire Rain or Shine release over on Simon’s website. Thanks again for stopping by, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!

Simon Says Stamp Rainbow Mod Plants

Hello Friends and welcome back! Thanks for joining me for today’s project featuring the new Mod Plants from Simon’s latest release, Rain or Shine. You’ve had a few day to peruse the release, what are your favorites? Let me know in the comments! Let’s go ahead and run through the details for this one!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by pulling my Bubblegum, Sunbeam and Seafoam inks. I picked out one plant from this set to do a repeat rainbow pattern. Once the stamp was place in the Misti, I inked the top portion of the stamp with the Bubblegum ink and used a blending brush to soften the edge of the ink. I did end up stamping several times to get good coverage. I then inked the middle portion of the stamp with the Sunbeam ink, softening the edges as before. I then inked the bottom portion of the stamp with the Seafoam ink, softening the edges of the ink again.

Once I was finished with one leaf, I moved it to the next area on my panel and repeated those stamping steps each time. When finished, I used the Postage Stamp Edge Frames to trim the panel down. This was then adhered to the card base using foam tape. The Sending Love & Hugs sentiment was cut once from gold cardstock and twice from Neenah 110lb cardstock, and the shadow portion was also cut twice. All of those pieces were adhered together using liquid glue and then added to the card with foam strips to finish up.

That does it for this one! It’s a simple design, but I really like how it turned out! Thank you so much for joining me today! I hope you have a fabulous day, and don’t forget to stay awesome!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Together by Design is our monthly collab where a group of designers all create with products from the same featured brand/designer, each adding their own creative twist. Tap the tags below to see every project and meet the designers. Happiest Friday, Friends! If you know me, you know that I’m all about the snark! I had to play with the Dumpster Fire set from @teamspellbinders to satisfy the snarky craving! You can find all of the details over on my blog at redsas.co, if you’re interested. I hope you all have a wonderful Friday and a great weekend! Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day!