Tag: Winter Cards

Simon Says Stamp Snowy Plaque Slide

Hello Friends, and welcome back! It’s been a little bit! I was super busy creating for the STAMPtember collab sets, and took a smidge of a break. I’m back today with a card featuring the new Plaque Slides from Simon’s latest release, Sugar & Spice. Let’s get to the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I went into this project knowing that I wanted to make a shaker card, so I used the A2 Scalloped Rectangles to cut the frame. I then used snowflakes from the Snowflake Season set to stamp onto acetate using white ink and heat embossed using clear embossing powder. For the background, I remembered that I had some Color Blend Cardstock hanging around, so I also cut that using the A2 Scalloped Rectangles.

The slide was created using silver cardstock and the new Plaque Slides die cut along with the new Plaque Slides Christmas stamp set. I used the same white ink and embossing powder for the sentiment. I wanted the slide to be a bit more sturdy, so I cut it an additional four times from Neenah and glued all of those together.

The Lilac ink paired perfectly with the Color Blend cardstock, so I splattered my card base with that and set that aside to dry while I worked on the shaker. I glued the acetate to the frame and used foam tape to build the walls of the shaker. I sprinkled in some Diamond Dust and adhered the purple panel in place. My ribbon was woven in place and secured using liquid glue before everything was adhered to the card bae to finish up.

That does it for this project! I hope you enjoyed it! Based on the name of this new Christmas stamp set, I have to believe there will be other sets coming in the future! Don’t forget to head on over to check out the entire Sugar & Spice release! Thanks again for stopping by, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day! Hey Friends! I’m back today with a project featuring the Layering Pine Sprigs from @simonsaysstamp latest release, And Everything Nice. You can find more details on my blog at redsas.co, if you’re at all interested. Hope you all have a wonderful Tuesday! Happy Wednesday, Friends! I’m back with a project featuring the new Snowy Hillside Embossing Folder from @simonsaysstamp latest release, And Everything Nice. You can find more details over on my blog at redsas.co. I hope you all have a fabulous day!

Spellbinders Foliage Swag

Hello Friends, and thanks for joining me! Today’s project is featuring several new products from the Spellbinders August releases. I had a lot of fun creating this swag, so let’s go ahead and go through the details.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by die cutting the Christmas Foliage from Crimson, Fern and gold cardstock. I will mention that this leaf was cut multiple times to achieve this full look. I did some ink blending Lush Forest and Brick inks. Once I was done with that, I assembled the flowers and white splattered the leaves and added “ice” using glue and clear glitter.

The background panel was created using the new Bow & Bell Scallop Frame along with some gold splatter. I cut the Merry sentiment once from gold cardstock and twice from Neenah 110lb cardstock and adhered all of those together for that stacked sentiment that we all love.

The panel was adhered to the card base, the leaves were glued in place, as were the flowers and the sentiment.

It was a lot of die cutting, but I’m quite happy with the end project. It’s hard for me to work on holiday cards this early in the year, but I didn’t mind this one, because I think it came out so pretty. Thanks again for joining me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day! Hey Friends! I’m back today with a project featuring the Layering Pine Sprigs from @simonsaysstamp latest release, And Everything Nice. You can find more details on my blog at redsas.co, if you’re at all interested. Hope you all have a wonderful Tuesday! Happy Wednesday, Friends! I’m back with a project featuring the new Snowy Hillside Embossing Folder from @simonsaysstamp latest release, And Everything Nice. You can find more details over on my blog at redsas.co. I hope you all have a fabulous day!

Simon Says Stamp Winter Wishes

Hey There! Thanks so much for stopping by to check out today’s project featuring the Tim Holtz Be of Good Cheer set! You can snag this set free with any $25 purchase of Tim Holtz products over on Simon’s website! Let’s go ahead and get into the details, shall we?

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the snowman from the set using color coordinating pieces of cardstock. Since I was going for a snowy card, I opted to use blues for mine. Once all the pieces were cut, I assembled the snowman and set that aside while I worked on the rest of the card.

I found a piece of snowflake patterned paper and thought that would work well, so I trimmed it down to size and splattered it with some black acrylic ink. I created a frame with black cardstock using the Postage Stamp Edge Frames and also cut a black square as a backdrop for the snowman. To add a little distress, I rubbed the edges with Ranger Picket Fence ink as well. The sentiment was created using blue cardstock and the TH Sizzix 661600. I was unable to locate this set on Simon’s website or even Tim’s website, so I’m assuming that it has been discontinued. My apologies about that, but any sentiment in your stash would work perfectly fine!

The black frame was adhered to the snowflake paper using foam strips, as was the sentiment strips and the smaller black center square. Because I like dimension so much, I went ahead and adhered the snowman with foam tape as well. One can never have too much dimension!

That does it for this one! I hope you enjoyed it as much as I did! Have you snagged your Be of Good Cheer set yet?! If not, head on over to Simon’s website to do so before they’re gone! Thanks again for joining me today, and I hope you have a wonderful holiday season!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day! Hey Friends! I’m back today with a project featuring the Layering Pine Sprigs from @simonsaysstamp latest release, And Everything Nice. You can find more details on my blog at redsas.co, if you’re at all interested. Hope you all have a wonderful Tuesday! Happy Wednesday, Friends! I’m back with a project featuring the new Snowy Hillside Embossing Folder from @simonsaysstamp latest release, And Everything Nice. You can find more details over on my blog at redsas.co. I hope you all have a fabulous day!

Simon Says Stamp Good Cheer Ornament

Hello Crafters, and welcome back to my blog! Thanks so much for stopping by to check out today’s project featuring the Tim Holtz Be of Good Cheer set! Let’s run through the details for this one!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the snowman pieces from the set with color coordinating cardstock. I then adhered the pieces of the snowman and went to work on the Layered Rosette from Simon’s latest DieCember release. I die cut the pieces of the rosette from Neenah 110lb cardstock and did some ink blending using Cabbage and Artichoke ink. You can tell from the images that I die cut the smaller rosette from gold cardstock as well, for layering purposes. Before adhering the pieces, I did some white ink splatter for a bit of added interest.

Since I made this into an ornament, I die cut the larger rosette four times, used a hole punch so that I could tie ribbons, and adhered all of those together with liquid glue. To give it a bit of aging, I rubbed some Gathered Twigs Oxide ink along the edges as well. The snowman was then adhered using foam tape for added dimension.

To finish up, I used some gold thread for the hanging portion of the ornament, and used some red and white twine to make a bow as well. That does it for this project! I hope you enjoyed it as much as I did. You can receive your own Be of Good Cheer set free with an $25 Tim Holtz purchase. Thanks again for joining me, and have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Today I’m participating in a Simon Says Stamp Instagram hop, and we’re featuring the DieCember® release! To start from the beginning of the hop, head to @simonsaysstamp! Happiest Friday to you! I’m back today with a twist on the Mountain Horizon die cut from @simonsaysstamp DieCember release. I opted to use mine for an abstract type of design, and I kinda like how it turned out! You can find more details over on my blog at redsas.co. I hope you all have a fabulous day! Hello Friends, and welcome to DieCember 2025! My project today is featuring the new Classic Leaf Ring in a super fun color palette! You can find more deets over on my blog at redsas.co. Hope to see you there! Have a fabulous day! Happy Monday, Friends! I hope everyone had a wonderful weekend! Today’s post is featuring the Tree Plate from @simonsaysstamp in red and white. You can catch all of the details over on my blog at redsas.co. Hope you have an awesome day! Hey Friends! I’m back today with a project featuring the Layering Pine Sprigs from @simonsaysstamp latest release, And Everything Nice. You can find more details on my blog at redsas.co, if you’re at all interested. Hope you all have a wonderful Tuesday! Happy Wednesday, Friends! I’m back with a project featuring the new Snowy Hillside Embossing Folder from @simonsaysstamp latest release, And Everything Nice. You can find more details over on my blog at redsas.co. I hope you all have a fabulous day!

Spellbinders October 2024 Large Die of the Month Cozy Toes Slippers

Hello Crafty Friends, and welcome back! Thanks so much for stopping by! The October Large Die of the Month from Spellbinders is titled Cozy Toes Slippers, and this is such a cute set! It includes elements to make slippers that feature a bunny, a reindeer, a penguin, Santa and even a monster! I chose to do the Santa slippers, so let’s go ahead and run through the details, shall we?

If you are not familiar with the Spellbinders Clubs, here’s a little bit about how it works ..

  • On the 6th of the month, Non-Club members can join the club and get this month’s Club product(s) at the reduced Club Member price with free shipping.
  • On the 27th of the month, registration for this month’s club products closes.
  • On the 10th of the next month, Club products become available to everyone without requiring a Club membership; however, they are available at regular price and there is no free shipping. If a product is sold out, it will be re-ordered.

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by sorting through the dies and identifying those that pertained to the Santa. I then began cutting from colors of cardstock that coordinated with the pieces. I cut the pajama pants from patterned paper from my stash, and cut the slippers from black, and so on. You get the idea!

Once all of the pieces were cut, I began assembling them. I’m not even going to lie, I do have to refer to the images on the website sometimes to figure out what I’m supposed to be doing with the pieces! I decided that I needed a background, so I used the Argyle Plaid 3D Embossing Folder for that.

I adhered the pants and slippers using foam tape for added dimension, and applied glue and glitter to Santa’s hat for some sparkly additions. I also decided to apply some Glossy Accents to Santa’s nose as well. The sentiment is from the Mistletoe Greetings BetterPress set, and that was created using BetterPress Black ink, and then glued directly atop the pajama pants to finish up.

That does it for this project! I hope you enjoyed it as much as I did! There are so many fun options with this set for some super, cute Christmas or wintery cards! Thanks again for stopping by, and have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts