Reverse Confetti I appreciate you

Hello Friends! Thanks for joining me today! I’m back with another card using Reverse Confetti products. I recently purchased the You Coordinates, Confetti Cuts and the Big Flower Cover Panel Confetti Cuts, and wanted to use those together to make a card. Let’s get into the details!

I started this project by using the Big Flower Cover Panel to cut a panel from Neenah Classic Crest 110lb cardstock. I also went ahead and cut another panel from SSS Holographic Rainbows cardstock. I removed the white negative pieces from the panel and adhered that to a Neenah 110lb card base, using liquid glue.

I placed foam tape on the back of the negative pieces from the holographic panel and inlaid those atop the white panel. I die cut the You shadow twice from white cardstock, and die cut the main You piece twice from black cardstock, adhering those together with glue. That was then glued in the center of the panel.

I stamped the I Appreciate sentiment, from the You Coordinates, using VersaFine Onyx Black ink and heat embossed that using Ranger Clear Embossing Powder. I then trimmed it out and glued it atop the You.

Super simple card for today, but I love both of these sets so much! I love the flowers using holographic cardstock as well. I think it gives it a lot of interest and catches the light really well. Thanks for stopping by today, and don’t forget to stay awesome!

Supply List:

*Affiliate links used at no cost to you. Thank you so much for your support!

Latest Instagram Posts

Reverse Confetti Special Delivery

Hey! Hey! Hey! Thanks for joining me today! For this post, I’m sharing a project for the Reverse Confetti Stock Your Stash Challenge! This month’s card making theme is, Oh Baby! I hope that you’ll play along for your chance to win a $20 gift certificate to the Reverse Confetti store! More details to follow! For my project, I had to use The Bear Up There set, because it’s just too darn cute! Let’s get into the details.

To begin, I used Neenah Classic Crest 110lb cardstock and cut a panel using the new Peekaboo Cover Panel Confetti Cuts die. I then did some light ink blending on the panel, using leftover ink on my brush, which happened to be Distress Oxide Mustard Seed. I also used the Stitched Note and Frames Confetti Cuts die to cut a frame for the panel. I adhered the frame to the panel using foam tape for dimension.

I stamped the rainbow bear and cloud from The Bear Up There set using VersaFine Onyx Black ink and heat embossed them using Ranger Clear Embossing Powder. I stamped and embossed a few more clouds as well. I used Copic markers RV00, RV10, Y00, Y02, BG000, BG01, C00, E00, E40, E42, E43 and E70 to color the images. Once those were done, I used the coordinating Confetti Cuts to run them through the die cutting machine.

I adhered the bear and a cloud directly in the center of the Peekaboo Panel using foam tape, and positioned the remaining clouds around the panel and frame, adhering those with a combination of liquid glue and foam tape. I then slightly bent the peekaboo areas so that they would pop up, if you will. This was then adhered to my card base, which is also Neenah 110lb.

That finishes this project! I hope you enjoyed it, and I hope you’ll join our Stock Your Stash Challenge this month! You can head to the Reverse Confetti Blog for more details and the link to join in on the challenge! And a chance to win a $20 gift certificate!

Stay awesome sweet friend!

Supply List:

*Affiliate links used at no cost to you. Thank you so much for your support!

Latest Instagram Posts

Reverse Confetti July Release Blog Hop

Hello Crafty Friends and welcome to the Reverse Confetti Blog Hop! The July release is live today!! The full hop list will be listed below for you to check out all my teamies projects! You don’t want to miss it! For today’s project, I revisited the Circle of Waves Cover Panel Confetti Cuts, along with the Lovely Day Sentiments! So, let’s jump right in!

Today’s project was super fun! I really enjoyed making the rainbow circle of waves to adorn my card! To begin my project, I pulled out five rainbow colors from my Concord and 9th cardstock pile, and ran those through the die cutting machine using the Circle of Waves Cover Panel. I traced the die on piece of Neenah Classic Crest 110lb cardstock, and cut that out, using that as the base to glue my wave pieces.

I then took one of the rainbow circles and popped it in the Misti and stamped the You are Absolutely Wonderful sentiment, from the Lovely Day Sentiments, in the center using VersaFine Onyx Black ink and heat embossed it using Ranger Clear Embossing Powder. I cut a panel of black cardstock just smaller than an A7 card base, and splattered it, using Royal Talens Amsterdam Titanium White Acrylic Ink. This is my favorite splatter medium because it stays bright white, and it’s a great splatter consistency.

I positioned the rainbow circles atop the splattered panel, deciding on placement. I then adhered the outermost rainbow circles using liquid glue, trimmed the excess and adhered the main circle in the center using foam tape. I decided that I would add some additional circles, to mimic the splatter, using the Stitched Circles Cover Panel Confetti Cuts. I die cut a scrap of Neenah 110lb and added some of the larger circles using foam tape, and gluing the smaller circles.

That finished up this project! I hope you enjoyed it, and I hope it inspires you to get crafty in your space! I love how you can change up the feel of a die just by switching the colors used! Thanks so much for stopping by today!

As I mentioned earlier, there’s a bog hop today to celebrate the release! Hop around and check out all of the inspirations from my teammates! The full hop order is below!

Reverse Confetti Blog

Kelly Lunceford

Amy Kolling

Tricia Barber

Amy Rohl

Lisa Henke

Deanne Kuntz

Becky Roberts

Tracy Ware

Ali Farmer

Cheiron Brandon

Dilay Nacar

Jeanne Jachna

Heather Ruwe

Kelly Griglione

Audrey Tokach

Jenny Colacicco

Olga Moss

Candice Fisher

Michelle Short

Olga Matyushevskaya

Amy Tsuruta

Joe Sysavath

Supply List:

*Affiliate links used at no cost to you. Thank you so much for your support!

Latest Instagram Posts

Reverse Confetti Countdown to Confetti Day Three

Hello Crafters and welcome back to day three of the Reverse Confetti Countdown to Confetti! The release will be going live tomorrow, woohoooo! Please note that new product links will not be active until then. To celebrate the countdown, we are having a blog hop, with a gift certificate up for grabs! Details below! For today’s projects, we are featuring the Oceans of Love and Hummingbirds sets! So, let’s jump right in to the projects!

For my first project, Oceans of Love, I began by grabbing the new Circle of Waves Confetti Cuts and cutting five different colors of blue cardstocks. Most of the blue cardstock is from Concord and 9th, and one is from Simon Says Stamp. I traced the circular die and fussy cut a solid circle and glued the “waves” to that.

I used the Oceans of Love set to stamp some of the elements using VersaFine Onyx Black Ink on Neenah Classic Crest 110lb cardstock, and heat embossed them using Ranger Clear Embossing Powder. Before cutting those out using the coordinating die, I used Copic Markers BG70, BG72 and BG75 to color the images. I took the “waves” circle and stamped the sentiment on it using VersaMark Ink and heat embossed that using SSS Detail White Embossing Powder.

I cut a panel of Neenah Classic Crest 110lb using the Reverse Confetti Stitched Circles Cover Panel Confetti Cuts and poked out all of the larger circles and a few of the smaller circles. I used a scrap of the blue cardstock to run that through using that same cover panel, because I wanted these to be the “bubbles” on the card. I adhered the Stitched Circles panel to my card base, which is also Neenah 110lb using liquid glue.

Then, I inlaid some of the blue “bubbles” for interest. I adhered the circular waves panel using foam tape and adhered the colored underwater elements using glue, adding some of the “bubbles” atop that as well. That finishes up this project!

For my second project, I’m featuring the Hummingbird set along with the new Circle Element! To begin this project, I stamped the Hummingbird set using VersaFine Onyx Black Ink on Neenah 110lb and heat embossed those using Ranger Clear Embossing Powder. I colored the images using Copic Markers Y08, Y11, Y13, Y15, RV10, RV11, RV13, RV32, RV34, RV66, YG11, YG13, N4, N6, G00, G20, BG70 and BG72.

Once those were all colored, I used the coordinating die to cut them out. I used the Circle Element Cover Panel to cut a piece of Neenah Classic Crest 110lb, and I used another panel to cut a frame using the Stitched Note and Frames Confetti Cuts. I used PinkFresh Studio Sunshine ink to do some light ink blending on the panel and the frame.

I stamped the sentiment from the Hummingbird set using VersaFine Onyx Black Ink and heat embossed it using the same clear embossing powder. I trimmed that down and placed it behind the frame, and then added foam tape to the frame for dimension. I then adhered the frame to the Circle Element panel. I wanted a little added interest behind that Circle Element panel, so I cut piece of Concord and 9th Sea Glass cardstock and adhered that behind.

I then began adhering the Hummingbird elements to my framed panel using a combination of glue and foam tape. My panel was then adhered to my card base, which is also Neenah 110lb. To finish up this project, I added some PinkFresh Studio Jewels, because every project needs some bling in my opinion!

That does it for day three of the Countdown! I hope you enjoyed these projects, and I hope it inspires you to get crafty! Please note that the new product links will not be active until the release day and time.

As I mentioned earlier, to celebrate the countdown, we are having a blog hop! Leave comments along the hop for your chance to win a $15 gift certificate! You can also comment on Reverse Confetti’s Facebook page for another chance to win a gift certificate! Comments close at noon CST on July 7th and the winner will be announced at 5pm on July 7th over on the RC blog and FB page. The full hop list is below.

Reverse Confetti Blog

Amy Kolling

Tricia Barber

Lisa Henke

Deanne Kuntz

Tracy Ware

Ali Farmer

Dilay Nacar

Jeanne Jachna

Kelly Griglione

Audrey Tokach

Olga Moss

Candice Fisher

Olga Matyushevskaya

Amy Tsuruta

Joe Sysavath

Supply List:

*Affiliate links used at no cost to you. Thank you so much for your support!

Latest Instagram Posts

Reverse Confetti Lovely Day

Hello Friends and welcome back to my blog! Thanks so much for stopping! It’s day two of the Reverse Confetti Countdown to Confetti! The release will go live on July 8th, so please note that new product links won’t be active until release day and time! To celebrate the Countdown, we are having a blog hop! I hope you’ll hop around and leave comments along the way for your chance to win a gift certificate! Details below! Today’s project is featuring the Lovely Day Sentiments stamp set along with the Bloom set, and Peekaboo Cover Panel Confetti Cuts from the new July release! I enjoy coloring, so this was a super fun card for me! Let’s jump right in!

I began this project by stamping the elements from the Bloom stamp set using VersaFine Onyx Black ink and heat embossing those using Ranger Clear Embossing Powder, on Neenah Classic Crest 110lb cardstock. While I was already stamping, I went ahead and stamped my sentiment from the Lovely Day Sentiments set using the same ink and powder. I used Copic Markers Y08, Y11, Y13, Y15, YG07, YG11, YG13, YG17, YG61, RV00, RV10, RV11, RV32, RV34, BG70, BG72, BG75, BV00, BV01, BV02 and YR24 to color the flowers and leaves before using the Bloom Confetti Cuts to run those through my die cutting machine.

I cut a panel of Neenah 110lb cardstock using the Peekaboo Cover Panel Confetti Cuts and carefully pulled up some of the cut portions. Laura Bassen would have used the term “jooshed.” So yeah, I jooshed the little peekaboo areas on the panel. I applied foam tape to the back of the flowers and adhered those to my panel, tucking the leaves behind the single flower at the bottom and securing with glue. I trimmed off the excess and adhered this panel to a black cardstock panel.

I fussy cut my sentiment and popped it in the center of the card using foam tape again. I love foam tape, if you couldn’t tell! Anyhoo, my panels were then attached to my card base, which is also Neenah 110lb. To finish up the project, I added some PinkFresh Studio Jewels because you’ve gotta have bling!

That does it! I hope you enjoyed this project, and I hope it inspires you to get crafty! I hope you’ll hop over and check out the new July release from Reverse Confetti! It’s such a beautiful release!

As I mentioned earlier, we are celebrating this release with a blog hop! You can comment along the hop for your chance to win a $15 gift certificate. Comments close on July 7th at noon CST, and the winner will be announced at 5:00pm on the Reverse Confetti Blog and Facebook page. Speaking of Facebook, you can also leave a comment over there for another chance to win a gift certificate! You can head to the RC Blog for more details! Here is the full hop line-up!

Reverse Confetti Blog

Amy Kolling

Tricia Barber

Lisa Henke

Deanne Kuntz

Tracy Ware

Ali Farmer

Dilay Nacar

Jeanne Jachna

Kelly Griglione

Audrey Tokach

Olga Moss

Candice Fisher

Olga Matyushevskaya

Amy Tsuruta

Joe Sysavath

Supply List:

*Affiliate links used at no cost to you. Thank you so much for your support!

Latest Instagram Posts

Reverse Confetti Hello Sunshine

Hello! Hello! How’s it going? Thanks so much for stopping by! Here’s another card that I created for day one of the Reverse Confetti Countdown to Confetti! This awesome release will go live on July 8th! So, please note that the new product links will not be active until the release day and time. Hop around and check out what my teammates have created! Leave comments along the way for your chance to win a $15 gift certificate! Details below! There are tons of fun things in this release! You certainly don’t want to miss it! Today, I’m featuring the Lovely Day Sentiments and the Stitched Pinwheel Cover Panel Confetti Cuts. So, let’s jump right in!

To begin this project, I pulled out seven different colors of Sizzix cardstock, and cut all of those using the Stitched Pinwheel Cover Panel, as well as, cutting it once from Neenah Classic Crest 110lb cardstock. I adhered the white frame portion to my card base, which is also Neenah 110, using foam tape.

I then inlayed the colored cardstock portions into the frame using foam tape as well. I stamped the Hello Sunshine sentiment from the Lovely Day Sentiments set using VersaFine Onyx Black ink and heat embossed it using Ranger Clear Embossing Powder. I fussy cut the sentiment and used foam tape again to pop it up in the center of my card.

To wrap up this project, I added some PinkFresh Studio Jewels for some added interest and bling. Every card needs bling in my opinion! Super simple card, but I love how it came out! The pastel colors are beautiful, but I’m also wanting to do another one in brighter rainbow colors! I hope you’ll stop by and check out the new July release from Reverse Confetti! Remember, the new product links won’t be active until the release day and time!

As I mentioned earlier, you can comment on the Countdown posts for a chance to win a $15 gift certificate! You can head to the Reverse Confetti blog for all of the details! And, you can also comment on their Facebook page for another chance to win! Here’s the full list of participants.

Reverse Confetti Blog

Amy Kolling

Tricia Barber

Lisa Henke

Deanne Kuntz

Tracy Ware

Ali Farmer

Dilay Nacar

Jeanne Jachna

Kelly Griglione

Audrey Tokach

Olga Moss

Candice Fisher

Olga Matyushevskaya

Amy Tsuruta

Joe Sysavath

Supply List:

*Affiliate links used at no cost to you. Thank you so much for your support!

Latest Instagram Posts

Reverse Confetti Tropical Leaves Birthday

Hello Crafty Friends and welcome back! It’s day one of the Reverse Confetti Countdown to Confetti! I’ve had so much fun guest designing for Reverse Confetti this month! Their new July release is awesome, with so many fun, cute and beautiful things to play with! To celebrate the sneak peeks, we are having a blog hop! You can hop around and leave comments along the way for your chance to win a $15 gift certificate! Details below! Today’s project is featuring the new Tropical Leaves! So let’s jump right in, shall we?! Please note that the new product links will not be active until the release day and time.

I’m going to preface this post by saying that the gel print, which I used for the Tropical Leaves, was created a REALLY long time ago! Like a really long time ago! It’s just been sitting in my stash. With that being said, the tools used for the gel print were inexpensive acrylic paints, a brayer, thin white paper and the gel press itself. Nothing fancy at all!

To begin this project, I stamped the Tropical Leaves on the gel print using VersaFine Onyx Black ink and heat embossed them with Ranger Clear Embossing Powder. I had two sheets of the gel prints, so I went ahead and repeated that process again. I then ran the stamped leaves through my die cutting machine using the Tropical Leaves Confetti Cuts. I ran the leaf die cuts through once more using Neenah 110lb and adhered those to my gel print leaves, only because my gel print leaves were on thin white paper and they needed some more stability. I pulled out a piece of watercolor paper and taped it to my board using masking tape. My board is an inexpensive clipboard from Target that I found a long time ago. I saturated my watercolor panel with water and added coordinating colors to it using my Karin Brushmarkers.

While that was drying, I used the Stitched Note and Frames Confetti Cuts to cut some frames from Neenah Classic Crest 110lb cardstock. I then used the Peekaboo Cover Panel Confetti Cuts to cut my dry watercolor panel, and adhered that to my card base, which is also Neenah 110lb. I fashioned the frames atop the watercolor panel making an X in the center of the card using foam tape. I trimmed off the excess frame portions and added those to the outer corners of my card.

I opted for a Happy Birthday sentiment from the Word Up set. I stamped that on black cardstock using VersaMark ink and heat embossed it using SSS Detail White Embossing Powder. I trimmed it down and mounted it to my card using foam tape as well. I then used a combination of foam tape and glue to position my leaves in the corners of the card around the sentiment.

To finish up, I added some PinkFresh Studio Jewels because every card needs bling in my opinion! I hope you enjoyed this project, and I hope it inspires you to get crafty in your space! Don’t forget to check out the July release from Reverse Confetti! Super fun and super cute! You don’t want to miss it! Keep in mind that the new product links won’t be active until the release goes live on July 8th.

As I mentioned earlier, to celebrate we are having a blog hop! Visit each of my teamies blogs and leave comments along the way for your chance to win a $15 gift certificate! All the details can be found on the Reverse Confetti blog. And .. you can also comment over on their Facebook page for yet another chance to win a gift certificate! The full hop list is below.

Reverse Confetti Blog

Amy Kolling

Tricia Barber

Lisa Henke

Deanne Kuntz

Tracy Ware

Ali Farmer

Dilay Nacar

Jeanne Jachna

Kelly Griglione

Audrey Tokach

Olga Moss

Candice Fisher

Olga Matyushevskaya

Amy Tsuruta

Joe Sysavath

Supply List:

*Affiliate links used at no cost to you. Thank you so much for your support!

Latest Instagram Posts