Simon Says Stamp Rainbow Pieces

Hello Crafty Lovelies and welcome back! Thanks so much for stopping by today to check out my post featuring the new Pinpoint Starlet Emboss and Cut folder from Simon’s latest release, Dream Big. There’s an Instagram Hop going on over there with lots of chances to win a $25 gift card to Simon’s store. You don’t want to miss out on that! So, let’s go through the details for this one!

For this project, I opted to use just the center cut portion of this folder, so I cut it thirteen times from Neenah Classic Crest 110lb cardstock, and pulled out a bunch of Distress Oxide Sprays and sprayed each piece a different color. I’ll list all of the supplies at the end, if you’re interested in what I used.

Once all the pieces were dry, I pulled out a few Tim Holtz stamp sets and stamped on all of the pieces using Ranger Archival Jet Black ink. For the sentiment, I used the SSS The World Needs and cut that three times from black cardstock and adhered all of them together using liquid glue.

My background paper is from 49 and Market and the pack is just gorgeous! I trimmed this piece down using the PFS Diagonal Stitched Rectangles, splattered it using Royal Talens Oxide Black Acrylic Ink and began the assembly process. I began by gluing the colored pieces along the left side of the panel in rainbow order, of course, in a step sort of way, and I glued the sentiment to the right side.

I felt like it needed something else, so I added a black butterfly to tie in all of the black elements going on, and trimmed off the excess. The panel was then adhered to a black panel using SSS Dot Tape Runner before being adhered to the card base in the same way.

That wraps this one up! To be honest, I worked on so many different ideas with these pieces, and none of them were thrilling me, until I came up with this step idea. I’m still not in love with it, but I kind of like it. Anyhoo, thanks for stopping by today! Head on over and check out the Instagram Hop going on, and comment along the hop for your chance to win a gift card! Have a wonderful day and don’t forget to stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Beachy Horizon

Hello Crafty Lovelies and welcome back! I’m so glad that you’re here! The latest Simon release, Dream Big, is now available and it’s a beauty! Today’s project is featuring the new stamp set, On the Horizon. So let’s get to the deets!

To begin, I ink blended a panel of Neenah Classic Crest 110lb cardstock using Distress Oxide inks in Scattered Straw, Tattered Rose and Spun Sugar. I thought these colors gave me the beach sunset vibe that I was looking for. Once the ink blending was complete, I used the PFS Diagonal Stitched Rectangles to trim it down and spritzed it with water.

I then stamped some of the beachy elements from the SSS On the Horizon set using VersaFine Onyx Black ink and heat embossed it using Ranger Clear Embossing Powder. I ended up heat embossing it twice to get a smoother finish.

The stamped panel was then adhered to a black panel using SSS Dot Tape Runner and the SSS Sentiment Strip was adhered using foam tape for a little bit of dimension.

Before adhering everything to the card base, I did splatter it using Royal Talens Oxide Black Acrylic Ink.

I’m not going to lie, I did have to redo the ink blending on a second panel, because I smudged black ink on the first one during the stamping process. Don’t you just hate it when stuff like that happens? Ugh, it drives me bonkers! Anyhoo, that finishes up this project. I hope you’ll stop by and take a look at the entire Dream Big release. Have yourself a wonderful day and don’t forget to stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Birthday Floral

Hello Friends, and thanks for stopping by! I’m still playing with goodies from Simon’s latest release, Dream Big. What are your favorites from this one? Today’s project is featuring the new Terrace Floral Embossing Folder and Die Cut. This is a really beautiful folder with so many possibilities! Let’s go through the details.

I began by trimming a panel of Neenah Classic Crest 110lb cardstock, spritzing it with some water and running it through the die cutting machine inside the folder.

Once the panel was ready, I did some ink blending on the flowers and leaves using SSS Pawsitively Saturated Inks in Lemonade, Citrine, Sprout, Fairway and Latte. I trimmed the panel down and adhered it to a black panel for contrast using SSS Dot Tape Runner.

I used the SSS Happy Birthday Brush Script die for the sentiment. I cut it once from gold cardstock and once from black cardstock. I also cut the shadow twice from black cardstock and adhered all of those together using liquid glue.

The sentiment was then adhered to the embossed panel using SSS 3D Foam Squares and then adhered to the card base. I added some PFS Gold Metallic Pearls for that little bit of bling, because all cards need a little bling, am I right?!

That does it for this one! I hope you enjoyed it, and I hope it inspires you to get crafty! Don’t forget to stop by and check out the entire Dream Big release and let me know your favorites! Have an awesome day and stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Slay Every Day

Hello and welcome back! I’m so glad you stopped by! Today’s project is featuring the new Blossom Vine from Simon’s latest release, Dream Big. I always love floral die cuts and this one was no exception! Let’s get into the details, shall we?

To start, I die cut the SSS Blossom Vine a bunch of times from Neenah Classic Crest 110lb cardstock. A bunch meaning eight times maybe. Then I pulled out an assortment of rainbow colored cardstock and die cut the floral from all of those as well. Yes, lots of die cutting! But, I do love making my own backgrounds using die cuts.

Once all of those were cut, I adhered them together using liquid glue, offsetting them just slightly so that you could see the colors beneath. I used the SSS Detail Bohemian Plate to cut a background for the flowers and glued the flowers atop that trimming off the excess.

I used the Slay Every Day sentiment from the SSS Yay You set and stamped that using VersaFine Onyx Black ink and heat embossed it using Ranger Clear Embossing Powder. I did heat set it a couple of times to give it a smoother finish. I then used the coordinating die to trim it out, and cut an extra to glue to it for more stability. The sentiment was then glued to the floral panel.

That panel was then adhered to a black panel using SSS Dot Tape Runner before being adhered to the card base. I added some PFS Iridescent Clear Drops for a little shine and sparkle to finish up.

That does it for this one! I hope you enjoyed it and I hope it inspires you to get crafty making your own backgrounds! Don’t forget to check out the entire Dream Big release over on Simon’s website. Have a wonderful day and stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Dragonfly Vibes

Hello Friends and thanks for stopping by! There’s a super fun Instagram Hop going on today to celebrate Simon’s latest release, Let’s Chill! You don’t want to miss it, because there are prizes to be won all along the hop! All you need to do is comment along the way and you could win a $25 gift card to SSS! For today’s card, I’m featuring several new products from this release, so let’s get into the details!

To begin, I stamped the new SSS Retro Tiles background stamp onto a panel of Neenah Classic Crest 110lb cardstock using SSS Pawsitively Saturated Inks in Bubblegum, Cantalope, Seafoam and Lilac. I applied the first color beginning at the top of the stamp and used a blender brush to soften the edges of the ink before stamping. I wiped the stamp clean, and continued with the next color until the panel was full. It’s super important to soften those ink edges with the brush or you’ll end up with hard edges.

Next, I trimmed the panel down using the SSS Chunky A2 Scalloped Rectangles. I set that aside, and began working on the dragonflies. For those, I used the new SSS Delightful Dragonflies set and foiled them using Spellbinders Gold Hot Foil on another panel of Neenah 110. Once done, I trimmed them out using the included die in the set.

For the sentiment, I opted to use the SSS Sending Good Vibes die and cut that once from Polished Gold cardstock and once from Neenah 110lb, while cutting the shadow once from the same white cardstock. I adhered all of those together using liquid glue and placed foam tape on the back. I also placed foam tape on the back of the dragonflies as well.

I determined placement of everything and decided that I could use a few leaves, imagine that! Every card that I make seems to need leaves! Anyhoo, I used the SSS Etched Meadow Flower and Leaves and cut three leaves and tucked them under the sentiment before adhering it, along with the dragonflies. The panel was then adhered to the card base using SSS Dot Tape Runner to finish up.

That finishes this one up! I hope you enjoyed it, and I hope it inspires you to get crafty! Don’t forget to head over to Instagram to join the hop for your chance to win a $25 gift card! Who doesn’t love prizes, am I right?! Thanks again for stopping by! Have a wonderful day and stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Sunshine Crocus

Hello Friends, and welcome back! The new Simon release, Let’s Chill, is live and boy is it a fun one! Today’s card is featuring the Hello Sunshine die in a repeat pattern. Let’s go through the details, shall we?

I began this project by die cutting the SSS Hello Sunshine twice from four different shades of yellow and orange. I did twice because I wasn’t sure how many it was going to take. I cut a panel of Neenah Classic Crest 110lb cardstock using the SSS Stitched Whirl Background, and began adhering the sentiment die cuts using liquid glue. I began at the top and worked my way down the panel.

Once all of the sentiments were adhered, I trimmed the panel down to the size of the sentiments. Moving along, I used the SSS Etched Crocus Stems to cut a few flowers from Neenah 110lb, and those were then glued directly atop the sentiments.

I splattered my card base using Royal Talens Light Gold Acrylic Ink and then adhered the panel using foam tape for dimension. No card is complete without bling, so I added a few pearls to finish up this project.

That does it! Simple card, but I love stretching my supplies and creating backgrounds from stand-alone sentiment dies. I hope you enjoyed it and I hope you’ll stop by and take a look at the entire Let’s Chill release. Have a wonderful day and don’t forget to stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Sunshine Medallion

Hello Friends, and thanks so much for stopping by! I’m back today featuring the new, super awesome Hello Sunshine die from Simon’s latest release, Let’s Chill! If you know me, you know that I love stand-alone sentiment dies, and I’ve had so much fun using this one! I’ve made several cards already using it! Anyhoo, let’s get into the details!

I began by die cutting the SSS Triangle Burst Medallion from four different yellow and orange cardstocks from my stash. I’ve had this die for a bit, but this is my first time using it, and I can totally see myself using it again for future projects! I also die cut the SSS Hello Sunshine once from gold cardstock and two more times from scraps of Neenah Classic Crest 110lb cardstock, adhering all of those together using liquid glue.

For the background, I used the SSS Geometric Lattice Embossing Folder and added a light layer of ink blending in the center using SSS Pawsitively Saturated Ink in Sunbeam. I went ahead and adhered all of the medallions together, offsetting them just slightly for a fuller look.

I did trim the Hello Sunshine die apart because I wanted the sentiment centered in the middle of the medallion. I glued those pieces to the medallion and then glued the medallion to the embossed panel as well.

The panel was then adhered to a black panel using foam tape for dimension, before being adhered to the card base. Of course, I had to add some PinkFresh Studio Gold Metallic Pearls for that added bling!

That finishes up this one! This was a simple card, but I love the medallion focal point with that shiny sentiment! Don’t forget to stop by and check out the entire Let’s Chill release! Have a wonderful day and stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Graceful Butterfly

Hello Crafty Friends! Thanks for stopping by! I’m back today featuring the new Graceful Butterfly set from Simon’s latest release, Let’s Chill. What an awesome release this is! Have you checked it out yet? I’d love to know your favorites! Let’s go through the details of this project.

I love white on white compositions with a hint of color, so that’s the direction that I went with this one. I began by using the SSS Graceful Butterfly embossing folder to emboss a panel of Neenah Classic Crest 110lb cardstock. Before embossing, I did spritz my panel of cardstock with some water just to loosen the fibers of the paper.

Once embossed, I used the coordinating die to trim the butterflies and bodies. I did however, only use one of the butterflies for this project and saved the others for future projects. While die cutting, I used the same die to trim the butterfly from various cardstocks, adhering the center of those together in rainbow order using liquid glue. Once that was done, I spritzed the butterfly with a sheer shimmer spray. Unfortunately, that doesn’t show up in the pictures.

Now on to the background. I used the SSS Stitched Whirl Background to cut a panel of Neenah 110 and trimmed it down just a bit further because I wanted to mount it onto a black panel, as I always do. I used a black Copic Multiliner pen to enhance some of the “whirls” on the panel before gluing the butterfly.

For the sentiment, I used the SSS Silhouette Sentiments set and stamped the sentiment on a scrap of black cardstock using VersaMark Ink and embossed it using SSS Detail White Embossing Powder. I used the coordinating die to trim it out, cutting three additional times as well to adhere all of those together. To assemble the card, I glued the butterfly and the sentiment directly to the panel and adhered the panel to a black panel using foam tape for dimension. I also added some iridescent confetti to finish up.

That does it for this card. I hope you enjoyed it, and I hope it inspires you to get crafty as well. I hope you’ll stop by and take a look at the entire Let’s Chill release! You won’t be disappointed! Thanks again for stopping by! Have a wonderful day and don’t forget to stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp You Did It Alcohol Ink

Hello! Hello! Thanks so much for stopping by! I hope you’re having a wonderful day so far! I’m back with another card featuring goodies from the latest Simon release, Yay You! If you know me, you know that I love stand-alone die cut sentiments, and today’s card is featuring just that! The new You Did It die cut! So, let’s go through the deets for this one!

I wanted a super simple card so that the sentiment would stand out and be the focal point, so I rummaged through my background box and found an alcohol ink background that I thought would be perfect. This particular background is using glossy cardstock along with Ranger Deception Alcohol Pearl Ink.

Once I decided on a background, I used the PinkFresh Studio Diagonal Stitched Rectangles to trim it down and give it a little interest along the edges. I also splattered the panel with Liquitex Iridescent Bright Silver Acrylic Ink.

I die cut the SSS You Did It once from SSS Matte Silver cardstock and twice from black cardstock and adhered those together using liquid glue, but offsetting them just slightly to create a shadow effect. As I always say, every card seems to need leaves and this one was no exception. I used the SSS Etched Meadow Flower and Leaves to cut a few leaves from black cardstock, as well as Neenah Classic Crest 110lb cardstock.

I trimmed the leaves down and adhered them underneath the sentiment using liquid glue, and adhered the sentiment with glue as well. I also had to add some PinkFresh Studio Silver Metallic Pearls for some added bling and interest. The alcohol panel was adhered to a black panel using foam tape and then to the card base using SSS Dot Tape Runner.

That does it for this one! Alcohol ink backgrounds are great, because I feel like you really only need a good sentiment and some small design elements to make a gorgeous card. Thanks again for stopping by! Have a great one and don’t forget to stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts

Simon Says Stamp Totally Amazing

Hello Friends! I hope you are doing well! I appreciate you stopping by today to check out my card featuring the new Arches Stencil from Simon’s latest release, Yay You. I’ve had so much fun playing with goodies from this release! Let’s get into the details for this one!

I began by trimming a panel of Neenah Classic Crest 110lb cardstock to a mini slimline size and adhering the stencil to it using masking tape. I used Turquoise Sea Glitz Glitter Gel from Gina K on this one. Once I got a good layer, I set that aside to dry while I worked on the rest of the card.

For the sentiment, I stamped the You are Totally Amazing, which is from SSS Clean Line Stacks set, on black cardstock using VersaMark Ink and heat embossed it using SSS Detail White Embossing Powder. I also used the coordinating die to trim it out, along with two more and adhered all of those together using liquid glue.

While I was die cutting, I die cut the SSS Delicate Leafy Branch a couple of times from black cardstock as well. I love the contrast that black elements provide on a card.

Now that the stenciled panel was dry, I decided the placement of the design elements and glued the black leaves underneath the sentiment and adhered the sentiment using glue as well. That panel was then adhered to a black panel using foam tape before being adhered to the card base using SSS Dot Tape Runner.

That finishes up this card! It’s always fun to use gels and pastes on cards, but I need to be better about sealing mine up, because they are becoming dried out. I hope you have a wonderful day and don’t forget to stay awesome!

Supply List:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts
Latest Instagram Posts