Simon Says Stamp Hello Floral Tag

Hello Crafty Friends, and welcome back! So glad you stopped by to check out today’s post featuring the new Scalloped Floral Tag from Simon’s latest release, You Are My Favorite. Have you checked out the release yet? I’d love to know your favorites in the comments! Let’s get right into the details for this one!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the tag pieces from Neenah 110lb and gold cardstock. I then used the Hanging Leaf Ring set to cut flowers and leaves from Cotton Candy and Sage cardstock. I did some ink blending on those pieces using Bubblegum and Sage inks, and then assembled the flowers and added some Dazzling Gems to the centers.

I die cut the background using the Chunky A2 Scalloped Rectangles set, gold splattered that and set it aside to dry while I worked on the sentiment. I die cut the hello, which is from the Handlettered Greetings, once from gold cardstock and twice from Neenah, adhering them together for a stacked sentiment.

The background was adhered to the card base, the leaves were glued in place, the tag was adhered using foam tape and the flowers were adhered using a combination of liquid glue and foam strips.

That does it for this project! I hope you enjoyed it! Head on over to Simon’s website to check out all of the new products from the You Are My Favorite release! Thanks again for joining me, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Simon must have discontinued the Chunky A2 Scalloped Rectangles as well as the Handlettered Greetings, because I was unable to locate those on their site. My apologies on that. I will link to items that are similar for your convenience.

Latest Posts

Latest Instagram Posts

Spellbinders Floral Scribbled Letter

Hello Crafty Friends, and welcome back! The Spellbinders March releases are available, and I’m back today with a project featuring the new Scribbled Letter Embossing Folder, along with the Holding Your Heart Sentiments BetterPress Plates. Can I just say right away that I absolutely love this embossing folder?! I love something that gives just a hint of texture but adds to the project! Let’s go ahead and run through the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by pulling cardstock colors that I wanted to use, which were Blush, Dahlia, Waterfall, Teal Topaz, Peridot, Fern, Beeswax and Saffron. I did use some Neenah for the white flowers as well. Once the papers were pulled, I went to work die cutting the flowers and leaves from the Colorful Expressions Blooms.

Those pieces were then ink blended using Carnation, Field, Honey, Surf and Gravel inks before being assembled. I created the background using the Scribbled Letter folder and then lightly rubbed a gold ink pad across the raised side of the panel. The sentiment, which is from the new Holding Your Heart Sentiments BetterPress Plates, was gold foiled and trimmed down.

I adhered the background panel to my card base first and then secured all of the other pieces with liquid glue, beginning with the underneath pieces. I added gold metallic pearls to the one branch and the three white flowers before adding the sentiment with foam strips.

That does it for this project! You all know that I love florals, so I really enjoyed this project, and I’m sure that I’m going to get lots of use from this embossing folder! Don’t forget to check out all of the new March releases over on Spellbinders’ website. Thanks again for joining me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Pastel Floral Hello

Hello Crafty Friends and welcome back! I’m back today with a project featuring the new Pretty Bows from Simon’s latest release, Favorite Things. Let’s run through the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by doing a bunch of die cutting! I used the Etched Crocus Stems to cut the flowers, the Budding Branches to cut the leaves, and the Double Plaid Cover for the background. All of that was cut from Neenah 110lb cardstock, while the Script Hello sentiment and one of the Pretty Bows were cut from gold cardstock. Now we all know that I like stacked sentiments, so that was cut an additional two times from Neenah and the bow was cut one additional time and all of those were adhered together using liquid glue.

Some light ink blending was added to the flowers and leaves using Bubblegum and Seafoam inks. Once done with the flowers, I assembled those and began the assembly of the card. The card base was splattered with gold before adding the Double Plaid Cover.

The leaves were secured with glue first, followed by the flowers. The bow and sentiment were added next, along with some Gold Metallic Pearls to bring all of the gold together.

That does it for this project! I hope you enjoyed it as much as I did! Don’t forget to stop over at Simon’s website to check out the entire Favorite Things release! Thanks again for joining me, and I hope you have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Floral ColorWheel

Hey There, Friends! Thanks for stopping by to check out today’s project featuring a shaped card using the new Color Swatch Wheel from Spellbinders. I’ve made several shaped cards lately, and I have to say that I quite enjoy it! Let’s go ahead and run through the details for this project!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began by die cutting the larger Color Wheel twice from Neenah 110lb cardstock. I scored one of those at 1/8th and used the bone folder to give it a good crease before securing the two pieces together with liquid glue. I then went to work cutting the different colors of cardstock using the swatch layer die cut.

The color combination for this card came from a Color Cube inspiration. I’ve said it before, if you haven’t tried the Color Cube, I highly recommend it! The new ColorWheel cardstock colors used on this card were Peridot, Saffron, Waterfall, Beeswax, Teal Topaz and Dahlia. Once all of those were cut, I glued them in place and went to work on the florals.

I used all of the same colors for the florals, which is from the Little Blooms set, with the addition of Raven. I assembled the flowers and then began gluing everything in its place beginning with the leaves. The middle flower was secured with a foam square for a little bit of dimension. The sentiment, which is from the Making Me Smile Sentiments set, was gold foiled onto Raven cardstock and trimmed out several times with the included die cut. That was then glued atop the floral. I added some gold metallic pearls to finish up.

That does it for this project! I hope you enjoyed it, and I hope it inspires you to create with the new ColorWheel cardstock colors and possibly to create a shaped card. Thanks again for joining me, and I have you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Spellbinders Sweeping Floral Hello

Hello Friends, and thanks so much for stopping by! I recently did a white on white card, and that prompted the idea for creating a black on black card. This project is using the Sweeping Script Sentiments BetterPress Plates and the Vivid Blooms from Spellbinders’ latest January releases. Let’s go ahead and go through the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project be gold foiling the hello, which is from the Sweeping Script Sentiments set, and then using the Fluted Classics Rectanlges to trim it out. I then splattered the panel with gold acrylic ink and set that aside to dry while I worked on the flowers.

I die cut several flowers and leaves from the Vivid Blooms set from black cardstock and cut the centers of the flowers from gold cardstock. I went ahead and assembled the flowers using liquid glue and got started on the card layout.

The leaves were glued in place first and the larger flowers were adhered with foam tape for a little bid of added dimension. The smaller flowers were tucked in and around to fill in and secured with glue as well. I did add some gold metallic pearls to one of the leaves to bring it all together before adhering the panel to the card base to finish up.

That does it for this project! I hope you enjoyed it as much as I did! Black on black isn’t for everyone, but I do love tone on tone projects! Thanks again for stopping by, and I hope you have a fabulous day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Leafy Hello

Hello Crafty Friends! I’m so glad that you stopped by to check out today’s project featuring the new Abundant Leaf Background from Simon’s latest release, Festive Fun. Let’s get right into the details, shall we?

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by die cutting the Abundant Leaf Background from a panel of Neenah 110lb cardstock. While the die cut was still in the panel, I did some light ink blending using Pine and Sage inks for some added depth. I knew that I wanted a floral card, so I pulled some flowers and went to work on those.

The flowers that I used for this card were the Layered Dandy Flower, Etched Crocus Stems and the Simple Flowers. I cut those from aqua and pink cardstock and did some ink blending on those as well using Bubblegum, Carnation and Mist inks. I should mention that I cut the centers of the flowers from yellow cardstock. Once my ink blending was complete, I assembled the flowers that needed it using liquid glue.

My background was created using a forest green cardstock with gold splatter, and I glued my leaf background to that. Most of the flowers were adhered using foam strips, while a few were glued directly atop the leaves. The hello sentiment was cut once from gold cardstock and twice from black cardstock, while the shadow portion was cut once from vellum. All of those pieces were adhered together and then glued directly to the panel. The panel was added to a Cotton Candy Pre-Scored card base, which is also from the Festive Fun release, and some Surf Dazzling Gems were added to finish up.

That does it for this one! I hope you enjoyed it! I always love making floral cards, so I had to sneak one in for this release! Don’t forget to head over to Simon’s website to check out the entire Festive Fun release. Thanks again for stopping by, and have a wonderful day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Artsy Hello

Hello Crafty Friends! Thanks for stopping by to check out today’s project featuring the Artsy Florals from Simon’s latest release, Sweet Wishes. Let’s go ahead and get into the details!

NOTE: all supplies are linked in the thumbnails at the end of this blog post.

I began this project by stamping the main flower from the Artsy Florals set using VersaFine Onyx Black ink and heat setting that with Ranger Clear Embossing Powder. I used Copic Markers BG72, BG75, BG78 and Y17 to color the image before cutting it out. I also used a Copic Multiliner to add some black dot detail to the center of the flower as well.

My next step was to create a background using the Wistful Leaves Embossing Folder. I did some light ink blending on the leaves using PFS Tidal Pond ink, and then used the Rainbow Splash Black ink pad to create the “black out” effect on the panel. I trimmed the panel down and adhered it to the card base.

I used the Lush Leaves and cut some of those from black cardstock, and went ahead and cut the sentiment, as well. I cut the hello, which is from the Handlettered Greetings set, once from gold cardstock and twice from black cardstock and adhered all of the pieces together for that stacked sentiment look that I love.

The black leaves were glued in place, while the central flower was adhered using foam tape. To finish up, the gold sentiment was glued directly to the center of the flower.

That does it for this project. I hope you enjoyed it! I really love this color combination with the aqua and the black. Thanks so much for joining me for today’s project, and I hope you have a wonderful rest of your day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Hello Leaf Border

Hello and welcome back to my blog! I’m so glad that you stopped by to check out today’s project featuring the new Arching Leaf Border from Simon’s latest release, Cheering For You. I’ve been stuck on color combinations lately, so I took inspiration for this project from the Color Cubes. So, let’s get into the details!

NOTE: all supplies are linked to multiple sources in the thumbnails at the end of this blog post.

I began this project by die cutting the Leaf Border from Neenah 110lb cardstock, die cutting the SSS Beautiful Buttercup from two shades of purple cardstock and die cutting the extra leaves from the border set from a peacock type color. I pulled some inks that I thought matched my inspiration, which you can see slightly in the photos. The inks that I used were PFS Tidal Pond, Opulence and Lush Forest. The border was ink blended with the Tidal Pond and a little bit of the Lush Forest, while the flowers were ink blended using the Opulence.

Once the ink blending was complete, I assembled the flowers using liquid glue and decided on a background. I ended up choosing a dark green panel and splattered it quite liberally with gold acrylic ink. When that was dry, I glued the border in place and then adhered the flowers using foam strips. The darker leaves were tucked in where needed and secured with glue.

Now that I had the card layout, I needed to find a sentiment that would fit! I landed on the SSS Hello Dies and cut that once from gold cardstock and twice from black cardstock and adhered all of those together for that stacked look. I went ahead and glued that atop the panel before adding some PFS Gold Metallic Pearls to bring everything together.

That does it for this project! I hope you enjoyed it! This is a weird color combo, but I quite like how this one came out! According to the Color Cube inspiration, my green layer actually should have been a dark teal color, but I didn’t notice that until it was too late. Oh well, what’s the saying, there are no mistakes in art. I’m just going to go with that! Thank for joining me today, and I hope you have an awesome day!

Supply List

Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which allows me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Simon Says Stamp Sunny Vibes Blog Hop Day One

Hello Friends, and welcome back! Today I’m participating in Day One of a Simon Says Stamp Blog Hop to celebrate the latest release, Sunny Vibes! Be sure to follow along the hop and comment along the way for your chance to win a $25 SSS gift card! Who doesn’t love gift cards, am I right?! There’s also a free gift with any $50 purchase. Just enter the code HELLO during checkout to receive this freebie! I’ll list the Blog Hop order at the end of my post so that you can follow along. And don’t forget, there will be a Day Two of the Blog Hop happening as well! Even more chances to win! My card today is featuring the new Gentle Layers Floral Wreath, along with the new Little Banners Basics. So, let’s run through the details!

Main Products:

I began this project by die cutting all of the pieces of the wreath from Neenah 110lb cardstock and doing some ink blending using SSS Pawsitively Saturated Inks in Sprout, Seafoam, Lilac, Sunbeam, Honey, Dew and Aspen. Once all of the ink blending was complete, I adhered the pieces together with liquid glue and adhered those to the wreath.

For my background panel, I used the SSS Wistful Leaves Embossing Folder and embossed a panel of Neenah 110lb cardstock and then splattered it with gold acrylic ink for added interest. I always say this, but I felt like I needed more leaves, so I used the SSS Winsome Branch and cut some of those from white and gold cardstock. The wreath was glued to the embossed panel and I tucked the extra leaves in place and secured those with a bit more glue.

I used the Hello sentiment from the new SSS Little Banners Basics set and cut the banner from Neenah cardstock and cut the shadow portion from gold cardstock, adhering those with glue and then adhering it to the panel with SSS 3D Foam Strips. To finish up, I adhered the panel to the card base with foam tape before adding some PFS Gold Metallic Pearls.

That does it for this one! I hope you enjoyed it, and don’t forget to join in the Blog Hop for your chance to win! Thanks again for stopping by, and I hope you have an amazing day! You can follow along the Hop below.

Hop Order:

Simon Says Stamp Blog 

Nina-Marie Trapani

Caly Person

Jennifer McGuire

Suzy Plantamura

Amy Rysavy

Debby Hughes

Lisa Addesa

Alberto Gava

Barb Engler

Kath Stewart

Karin Åkesdotter

Jean Doeringsfeld

Tracy Ware

Daniel West

Other Products:

* Affiliate links used at no cost to you. What does this mean? If you use the links within this post to make a purchase, I receive a small commission, which helps me to continue to post crafty content for your enjoyment. I truly appreciate your support!

Latest Posts

Latest Instagram Posts

Vintage Bits Cards

Hello Crafty Friends, and welcome back to my blog! I’m so glad that you stopped by! I love big washi, and I cannot lie! Ok, did you sing that line in the tune of I Like Big Butts?! Because I sure did! There are several companies that have big, beautiful washi tapes, and I’m just here to say that there needs to be a washi tape design team, and I need to be on it! I could create cards for days on end with washi tapes from 49 and Market and PinkFresh Studio. Anyhoo, today’s card is featuring the Vintage Bits washi tape from 49 and Market, so let’s run through the details.

Main Products:

I began this project by creating a panel of washi on Neenah 110lb cardstock and trimming it down using the SSS Postage Stamp Edge Frames. I thought that black and gold would look amazing with this, so that’s the direction that I went. I used the SSS Fancy Mother and SSS Hello and cut those once from gold cardstock and twice from black cardstock. I also cut the shadow portions twice as well, and adhered all of those pieces together using liquid glue.

I wanted another design element on the card, so I used the Tim Holtz Sizzix Mini Detailed butterflies set. I also cut that once from gold and twice from black and adhered them together. My panels were also adhered to a black panel to pull the design together.

The sentiments and butterflies were adhered to the cards using SSS 3D Foam Tape for a bit of dimension to finish up.

These are super simple cards, but I really love this washi tape! It makes for easy, yet beautiful cards, in my opinion! So, like I said, there needs to be a washi tape design team, and I need to be on it! Thanks for stopping by today! I hope you have a wonderful day, and don’t forget to stay awesome, friend!

Other Products:

* Affiliate links used at no cost to you. Thanks so much for your support!

Latest Posts

Latest Instagram Posts